Uploaded December 2022 | Updated September 2026, 1 week ago
Upgrade your XTool D1 Pro laser cutter and engraver with a protective control board PCB cover and button cover!
I have solicited a lot of feedback from XTOOL D1 users and have heard some common complaints about minor annoying issues.
The first of the issues is the lack of protection for the main control board PCB. The main control board sits behind/inside of the front frame member. Inside of a garage / wood working shop it is left exposed to the collection of dust and wood particles that will collect on top of the circuit board. Even by-products such as soot from the lasering process may collect on the board. Over time this may affect the board's ability to dissipate heat and could lead to the failure of the circuit board.
Therefore, the PCB cover provides a barrier to ingress of unwanted particles. There are some small vent holes to allow heat to escape. It is also very easily removed with a pull tab if something needs to be accessed behind the cover.
Additionally, another common complaint was the lack of protection for the main button. I have personally found this to be problematic when leaning over the machine to make last minute adjustments to work pieces. A few times my arm / elbow has accidently hit the main button which tells the machine to start. This is not ideal as you do not want your hands near the laser when it is operating.
For this I created the main button cover. It simply installs with 3M double sided tape (included). There is a flexible RED or GREY cap cover to keep the button protected from liquid spills that could find their way down to the mainboard beneath it. When the cap is removed the button sits safely inside of the plastic guard that prevents accidental activation.
You can find both of these upgrades here in a kit!
► embracemaking.com/products/xtool-d1-pro-pcb-and-button-cover-kit
One of my most popular upgrades for the D1 Pro are the fume extractor nozzles. You can find those here:
10W D1 Pro version:
► embracemaking.com/products/xtool-d1-pro-10w-fume-extraction-nozzle
20W D1 Pro version:
► embracemaking.com/products/xtool-d1-pro-20w-fume-extraction-nozzle
Check out my fume extraction system using an affordable shop vacuum:
► youtu.be/k7qTE4t4sf8
Always remember to practice proper laser safety. These lasers can seriously harm you directly (your eyes) or indirectly (your lungs and health). ALWAYS wear your safety glasses! By-products from processing certain materials can be toxic and harm you. DO NOT CUT vinyl materials like PVC. Check this list for hazardous materials before cutting something:
► wiki.atxhs.org/wiki/Laser_Cutter_Materials
If you are looking for products or items I've used with the D1 Pro in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
XTOOL D1 Pro 10W:
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 20W:
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
Adhesive Cable Tie Clips:
► amzn.to/3dTw4VS
CPAP Hose:
► amzn.to/3x4ffOJ
Laser Proof Silicone Work Surface Mat (20" x 28")
► amzn.to/3zDyMG7
Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► amzn.to/3A0Fzv1
If you want to go more in depth with the XTOOL Creative Space Software, check here:
support.xtool.com/hc/en-us/articles/6816833786519-Use-xTool-Creative-Space-XCS-to-Operate-xTool-D1-Pro
SAFETY WARNING: DO NOT CUT THESE MATERIALS:
► wiki.atxhs.org/wiki/Laser_Cutter_Materials
#laser #xtool #engraving
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
Upgrade your XTool D1 Pro laser cutter and engraver with a protective control board PCB cover and button cover!
I have solicited a lot of feedback from XTOOL D1 users and have heard some common complaints about minor annoying issues.
The first of the issues is the lack of protection for the main control board PCB. The main control board sits behind/inside of the front frame member. Inside of a garage / wood working shop it is left exposed to the collection of dust and wood particles that will collect on top of the circuit board. Even by-products such as soot from the lasering process may collect on the board. Over time this may affect the board's ability to dissipate heat and could lead to the failure of the circuit board.
Therefore, the PCB cover provides a barrier to ingress of unwanted particles. There are some small vent holes to allow heat to escape. It is also very easily removed with a pull tab if something needs to be accessed behind the cover.
Additionally, another common complaint was the lack of protection for the main button. I have personally found this to be problematic when leaning over the machine to make last minute adjustments to work pieces. A few times my arm / elbow has accidently hit the main button which tells the machine to start. This is not ideal as you do not want your hands near the laser when it is operating.
For this I created the main button cover. It simply installs with 3M double sided tape (included). There is a flexible RED or GREY cap cover to keep the button protected from liquid spills that could find their way down to the mainboard beneath it. When the cap is removed the button sits safely inside of the plastic guard that prevents accidental activation.
You can find both of these upgrades here in a kit!
► embracemaking.com/products/xtool-d1-pro-pcb-and-button-cover-kit
One of my most popular upgrades for the D1 Pro are the fume extractor nozzles. You can find those here:
10W D1 Pro version:
► embracemaking.com/products/xtool-d1-pro-10w-fume-extraction-nozzle
20W D1 Pro version:
► embracemaking.com/products/xtool-d1-pro-20w-fume-extraction-nozzle
Check out my fume extraction system using an affordable shop vacuum:
► youtu.be/k7qTE4t4sf8
Always remember to practice proper laser safety. These lasers can seriously harm you directly (your eyes) or indirectly (your lungs and health). ALWAYS wear your safety glasses! By-products from processing certain materials can be toxic and harm you. DO NOT CUT vinyl materials like PVC. Check this list for hazardous materials before cutting something:
► wiki.atxhs.org/wiki/Laser_Cutter_Materials
If you are looking for products or items I've used with the D1 Pro in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
XTOOL D1 Pro 10W:
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
XTOOL D1 Pro 20W:
► xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=D5HpJRsyqyUUnt&utm_medium=null&utm_source=influencer
Adhesive Cable Tie Clips:
► amzn.to/3dTw4VS
CPAP Hose:
► amzn.to/3x4ffOJ
Laser Proof Silicone Work Surface Mat (20" x 28")
► amzn.to/3zDyMG7
Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► amzn.to/3A0Fzv1
If you want to go more in depth with the XTOOL Creative Space Software, check here:
support.xtool.com/hc/en-us/articles/6816833786519-Use-xTool-Creative-Space-XCS-to-Operate-xTool-D1-Pro
SAFETY WARNING: DO NOT CUT THESE MATERIALS:
► wiki.atxhs.org/wiki/Laser_Cutter_Materials
#laser #xtool #engraving
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
