Uploaded December 2024 | Updated September 2026, 1 week ago
In this video I will take you in depth into getting started with the XTOOL S1 and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.
Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of enclosed areas like the xTool S1. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the xTool S1.
xTool S1 Rotary Tilt Kit:
► embracemaking.com/products/xtool-s1-ra2-pro-tilt-mechanism-kit
Back Stop and Bubble Level Holder:
► embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit
RA2 Centerline Indicator:
► embracemaking.com/products/xtool-ra2-centerline-indicator
Since the S1 will require safety glasses when not using the bottom pan, I have made safety glasses available that protect your eyes from both blue and infrared laser light. You can find those glasses here:
► embracemaking.com/products/laser-safety-glasses-blue-diode-ir
Haven't purchased your XTOOL S1 yet? Links below for the best XTool prices!
XTOOL S1:
► xtool.com/products/xtool-s1-laser-cutter?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
XTOOL S1 deluxe bundle:
► xtool.com/products/xtool-s1-laser-cutter?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306&variant=44189739385071
XTOOL S1 Riser Base
► xtool.com/products/xtool-s1-riser-base?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306&variant=44483268313327
RA2 Module:
► xtool.com/products/xtool-ra2-pro?_pos=1&_sid=1e57e74d2&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=44042680533231
In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the various xTool machines as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:
F1 V-Block, Pencil, Bottle Opener Jig
► embracemaking.com/products/xtool-f1-v-block-pencil-bottle-opener-jig
If you need fume extraction solutions for the XTOOL F1, see below:
Fume Filtration and Extraction
► embracemaking.com/collections/fume-extraction
Here you can find the S1 to 4" Hose Adapter:
► embracemaking.com/products/xtool-s1-flange-to-4-inch-101mm-hose-adapter
S1 to 4" 90 Degree Low Profile Adapter:
► embracemaking.com/products/xtool-s1-low-profile-90-degree-to-4-inch-101mm-hose-adapter
xTool AP2 / IF2 to 4" Hose Adapter:
► embracemaking.com/products/xtool-f1-ultra-to-4-inch-101mm-hose-adapter
xTool Smoke and Fume Filtration System:
► xtool.com/products/xtool-safetypro-ap2?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
xTool Inline Fan 2:
► xtool.com/products/xtool-safetypro-if2?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
If you are looking for products or items I've used with the S1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
4" Inline Duct Fan with Controller
► amzn.to/4a91Nd4
Air Quality Monitor
► amzn.to/3xgoaA2
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
40oz Tumblers (4 pack):
► amzn.to/3Mr0EV0
Tall Stainless Tumbler 4-Pack
► amzn.to/3CWBXLh
12oz Mug With Handle (8 Pack)
► amzn.to/3wqDadE
12oz Tumbler With Straw (12 Pack)
► amzn.to/3HZswgC
20oz Tumbler With Straw (25 Pack)
► amzn.to/48hQONK
Full Wrap Graphics from Etsy (I have no affiliation with these sellers)
etsy.com/ca/listing/1685955282/hawaiian-laser-engraved-full-wrap-design?ref=yr_purchases
etsy.com/ca/listing/1691487808/northern-lights-tumbler-wrap-laser-svg?ref=yr_purchases
etsy.com/ca/listing/1765610991/gearhead-40oz-tumbler-laser-engraving?ref=yr_purchases
Thank you @xToollaser
0:00 Intro
1:10 Riser Base Install
5:48 S1 Tilt Mechanism Upgrade
15:12 Wine Tumbler Setup
16:12 Wine Tumbler Settings
19:10 Cylindrical Full Wrap
24:30 Smoke and Fume Filtration
27:55 40oz Full Wrap
36:51 No Rotary No Problem
42:01 Outro
#tumblertutorial #engraving #xtool
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
In this video I will take you in depth into getting started with the XTOOL S1 and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.
Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of enclosed areas like the xTool S1. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the xTool S1.
xTool S1 Rotary Tilt Kit:
► embracemaking.com/products/xtool-s1-ra2-pro-tilt-mechanism-kit
Back Stop and Bubble Level Holder:
► embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit
RA2 Centerline Indicator:
► embracemaking.com/products/xtool-ra2-centerline-indicator
Since the S1 will require safety glasses when not using the bottom pan, I have made safety glasses available that protect your eyes from both blue and infrared laser light. You can find those glasses here:
► embracemaking.com/products/laser-safety-glasses-blue-diode-ir
Haven't purchased your XTOOL S1 yet? Links below for the best XTool prices!
XTOOL S1:
► xtool.com/products/xtool-s1-laser-cutter?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
XTOOL S1 deluxe bundle:
► xtool.com/products/xtool-s1-laser-cutter?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306&variant=44189739385071
XTOOL S1 Riser Base
► xtool.com/products/xtool-s1-riser-base?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306&variant=44483268313327
RA2 Module:
► xtool.com/products/xtool-ra2-pro?_pos=1&_sid=1e57e74d2&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=44042680533231
In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the various xTool machines as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:
F1 V-Block, Pencil, Bottle Opener Jig
► embracemaking.com/products/xtool-f1-v-block-pencil-bottle-opener-jig
If you need fume extraction solutions for the XTOOL F1, see below:
Fume Filtration and Extraction
► embracemaking.com/collections/fume-extraction
Here you can find the S1 to 4" Hose Adapter:
► embracemaking.com/products/xtool-s1-flange-to-4-inch-101mm-hose-adapter
S1 to 4" 90 Degree Low Profile Adapter:
► embracemaking.com/products/xtool-s1-low-profile-90-degree-to-4-inch-101mm-hose-adapter
xTool AP2 / IF2 to 4" Hose Adapter:
► embracemaking.com/products/xtool-f1-ultra-to-4-inch-101mm-hose-adapter
xTool Smoke and Fume Filtration System:
► xtool.com/products/xtool-safetypro-ap2?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
xTool Inline Fan 2:
► xtool.com/products/xtool-safetypro-if2?ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer
If you are looking for products or items I've used with the S1 in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
4" Inline Duct Fan with Controller
► amzn.to/4a91Nd4
Air Quality Monitor
► amzn.to/3xgoaA2
Electric Screwdriver:
► amzn.to/3P43fpz
Digital Calipers:
► amzn.to/48IQh7w
40oz Tumblers (4 pack):
► amzn.to/3Mr0EV0
Tall Stainless Tumbler 4-Pack
► amzn.to/3CWBXLh
12oz Mug With Handle (8 Pack)
► amzn.to/3wqDadE
12oz Tumbler With Straw (12 Pack)
► amzn.to/3HZswgC
20oz Tumbler With Straw (25 Pack)
► amzn.to/48hQONK
Full Wrap Graphics from Etsy (I have no affiliation with these sellers)
etsy.com/ca/listing/1685955282/hawaiian-laser-engraved-full-wrap-design?ref=yr_purchases
etsy.com/ca/listing/1691487808/northern-lights-tumbler-wrap-laser-svg?ref=yr_purchases
etsy.com/ca/listing/1765610991/gearhead-40oz-tumbler-laser-engraving?ref=yr_purchases
Thank you @xToollaser
0:00 Intro
1:10 Riser Base Install
5:48 S1 Tilt Mechanism Upgrade
15:12 Wine Tumbler Setup
16:12 Wine Tumbler Settings
19:10 Cylindrical Full Wrap
24:30 Smoke and Fume Filtration
27:55 40oz Full Wrap
36:51 No Rotary No Problem
42:01 Outro
#tumblertutorial #engraving #xtool
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
