Uploaded April 2019 | Updated November 2026, 1 day ago
Today, I've got another project that most people might not know what it is. This is a basic lidded box with several holes to allow air to circulate and keep the garlic fresh.
We had a ceramic garlic keeper (most you see are ceramic), but it recently cracked. I had a couple of canary wood cutoffs that I thought would look nice in the kitchen beside the bubinga salt cellar that I recently turned. Due to not having the right sized chuck jaws, I had to change directions and reuse the ceramic lid. While it wasn't what I originally had in mind, I think it turned out nicely. This was a great project and I learned a lot doing it. I hope you enjoy it also.
Please subscribe to my channel: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
1" Roughing Gouge: amzn.to/2YXnbPn
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1" HSS Standard Skew Chisel: bit.ly/2Eh7EkO
1/8" HSS Parting Tool: bit.ly/2GAEBey
Angle Drill + Sanding Bundle: bit.ly/2ZwfmQU
Yorkshire Grit: bit.ly/2GQszNm
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Doctor's Woodshop High Build Friction Polish:bit.ly/2CM4rbP
Today, I've got another project that most people might not know what it is. This is a basic lidded box with several holes to allow air to circulate and keep the garlic fresh.
We had a ceramic garlic keeper (most you see are ceramic), but it recently cracked. I had a couple of canary wood cutoffs that I thought would look nice in the kitchen beside the bubinga salt cellar that I recently turned. Due to not having the right sized chuck jaws, I had to change directions and reuse the ceramic lid. While it wasn't what I originally had in mind, I think it turned out nicely. This was a great project and I learned a lot doing it. I hope you enjoy it also.
Please subscribe to my channel: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
1" Roughing Gouge: amzn.to/2YXnbPn
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1" HSS Standard Skew Chisel: bit.ly/2Eh7EkO
1/8" HSS Parting Tool: bit.ly/2GAEBey
Angle Drill + Sanding Bundle: bit.ly/2ZwfmQU
Yorkshire Grit: bit.ly/2GQszNm
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Doctor's Woodshop High Build Friction Polish:bit.ly/2CM4rbP










