Uploaded October 2018 | Updated November 2026, 1 hour ago
Today's video will show you how to turn a pen on a lathe. Pen making is easy and a lot of fun! You can also find other woodworking and woodturning projects on my channel.
My website:
wolfridgewoodworking.com
Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
Today's woodturning project is a Penn State Fly Fishing kit (#PKFLYAP) with a Stabilized Maple Burl pen blank. This is a great project for anyone who is new to woodturning.
Pen making is one of the easiest projects to start with when you are beginning woodturning. All you need to get started woodturning a pen is a lathe, woodturning tools, a pen kit, a pen blank, sandpaper, some sort of finish, and a willingness to learn!
The basic steps to turning a pen is:
1. Cut the pen blank to fit the brass tubes.
2. Drill the proper sized hole to fit the brass tubes.
3. Make the ends of the blank flat and square.
4. Turn the pen blank down to the correct bushings.
5. If a wood blank was used, sand to 400 grit or if acrylic, skip to step 6.
6. Apply a finish like CA glue.
7. Sand using micro mesh pads from 1500 to 12,000 grit.
8. Apply one or more coats of a plastic polish.
Please leave a comment if there are any questions you have or if you feel like a missed explaining a step.
Tools that I used in this project
Jet 1221VS Lathe:
amzn.to/2OdLhCB
Easy Wood Tools Carbide Tools:
amzn.to/2N0FTy5
Pen Kit:
bit.ly/2QjqxH6
Pen Blank:
bit.ly/2NcO5LH
Medium CA Glue:
amzn.to/2DH72XJ
Sandpaper:
bit.ly/2xPbFcN
Micromesh:
amzn.to/2DHFIIC
Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj
#woodturning
Today's video will show you how to turn a pen on a lathe. Pen making is easy and a lot of fun! You can also find other woodworking and woodturning projects on my channel.
My website:
wolfridgewoodworking.com
Please subscribe to my channel: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
Today's woodturning project is a Penn State Fly Fishing kit (#PKFLYAP) with a Stabilized Maple Burl pen blank. This is a great project for anyone who is new to woodturning.
Pen making is one of the easiest projects to start with when you are beginning woodturning. All you need to get started woodturning a pen is a lathe, woodturning tools, a pen kit, a pen blank, sandpaper, some sort of finish, and a willingness to learn!
The basic steps to turning a pen is:
1. Cut the pen blank to fit the brass tubes.
2. Drill the proper sized hole to fit the brass tubes.
3. Make the ends of the blank flat and square.
4. Turn the pen blank down to the correct bushings.
5. If a wood blank was used, sand to 400 grit or if acrylic, skip to step 6.
6. Apply a finish like CA glue.
7. Sand using micro mesh pads from 1500 to 12,000 grit.
8. Apply one or more coats of a plastic polish.
Please leave a comment if there are any questions you have or if you feel like a missed explaining a step.
Tools that I used in this project
Jet 1221VS Lathe:
amzn.to/2OdLhCB
Easy Wood Tools Carbide Tools:
amzn.to/2N0FTy5
Pen Kit:
bit.ly/2QjqxH6
Pen Blank:
bit.ly/2NcO5LH
Medium CA Glue:
amzn.to/2DH72XJ
Sandpaper:
bit.ly/2xPbFcN
Micromesh:
amzn.to/2DHFIIC
Camera gear used to record project
Canon M50 Mirrorless Camera:
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj
#woodturning







