Uploaded June 2019 | Updated November 2026, 5 days ago
I'm not sure if you've ever had the pleasure of cutting grass when the yard is covered with sweet gum balls, but I have. Rumor on the street is that once you starting turning, you never look at wood the same. I'd like to add when you add resin to the mix, you always look for things you can mix in resin and make something with. When I was visiting back east last fall, I saw these little gems laying on the ground.
For this project, I used some Alumilite resin, yellow & violet dye, sweet gum balls, and a waste block. This proved to be more of a challenge than I thought. If I were to do it again, I would use a slow setting resin such as Total Boat's High Performance Resin with a slow hardener. I think a slow setting resin would allow it to seep into the nooks and crannies of the sweet gum balls. Also, even though they felt dry, I think putting them in the oven to dry out even further would have prevented some of the clutter you can see around the sweet gum balls. I learned a lot during this project and I hope you enjoy watching it.
The winner of the 500 subscriber giveaway is Carol Riley. Carol is a long time subscriber and has been with the channel almost from the beginning. Thank you again for all of the support you've given to the channel!
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Please subscribe to my channel: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools Ci2-R2 Square Radius Negative Rake Carbide Cutter: amzn.to/2LXhJt3
5/8" Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: amzn.to/2XoYbz0
1/8" HSS Parting Tool: bit.ly/2GAEBey
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1" Round Side Scraper: amzn.to/2L4xSLi
Alumilite Clear: bit.ly/2Bm1ZID
Alumilite 15 Color Dye Set: bit.ly/2AZOm1O
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
I'm not sure if you've ever had the pleasure of cutting grass when the yard is covered with sweet gum balls, but I have. Rumor on the street is that once you starting turning, you never look at wood the same. I'd like to add when you add resin to the mix, you always look for things you can mix in resin and make something with. When I was visiting back east last fall, I saw these little gems laying on the ground.
For this project, I used some Alumilite resin, yellow & violet dye, sweet gum balls, and a waste block. This proved to be more of a challenge than I thought. If I were to do it again, I would use a slow setting resin such as Total Boat's High Performance Resin with a slow hardener. I think a slow setting resin would allow it to seep into the nooks and crannies of the sweet gum balls. Also, even though they felt dry, I think putting them in the oven to dry out even further would have prevented some of the clutter you can see around the sweet gum balls. I learned a lot during this project and I hope you enjoy watching it.
The winner of the 500 subscriber giveaway is Carol Riley. Carol is a long time subscriber and has been with the channel almost from the beginning. Thank you again for all of the support you've given to the channel!
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Please subscribe to my channel: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools Ci2-R2 Square Radius Negative Rake Carbide Cutter: amzn.to/2LXhJt3
5/8" Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: amzn.to/2XoYbz0
1/8" HSS Parting Tool: bit.ly/2GAEBey
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1" Round Side Scraper: amzn.to/2L4xSLi
Alumilite Clear: bit.ly/2Bm1ZID
Alumilite 15 Color Dye Set: bit.ly/2AZOm1O
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com









