Uploaded January 2019 | Updated November 2026, 1 hour ago
Are you tired of not having accurate crosscuts? If you were like me, I used the small crosscut guide that came with my table saw. It was difficult to keep a long piece tight against the guide to get an accurate cut. It was time to upgrade to something better.
Today's project is all about making my life easier! I looked at quite a few different sleds and finally settled in on a design by King's Fine Woodworking. What I liked about it was the interchangeable zero clearance plates, the hold down t-tracks, and the saw stop for making repeatable cuts.
The build didn't go without at least one hiccup. The miter bar moved as I was laying the sled on it. That activator did it's job and locked it in. The only problem was the miter bar was slicing out an inch. All I could do was laugh it off. All in all, I'm very happy with how it came out and I look forward to using it in future projects.
Please leave a comment if there are any questions you have or if you feel like I missed explaining a step.
My website:
wolfridgewoodworking.com
SUBSCRIBE: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
King's Fine Woodworking Channel
bit.ly/2VWhTSq
Crosscut Sled Plans for purchase
bit.ly/2VXCSEB
PARTS USED (NOT affiliate links):
Rockler Hold Down Clamp
bit.ly/2suKnFx
Universal T-Track
bit.ly/2RPhfqO
Rockler Aluminum Miter Bar
bit.ly/2VVka0d
Kreg Solid Production Stop
amzn.to/2VUCJlg
TOOLS USED (NOT affiliate links):
RIDGID R4512 10 in. 13-Amp Cast Iron Table Saw
amzn.to/2GFNWCO
WEN 2.8 Amp 9 in. Benchtop Band Saw
thd.co/2T3I0oZ
Ryobi Cordless Fixed Base Trim Router
thd.co/2uamzdJ
Ryobi Cordless Brushless Hammer Drill/Driver
thd.co/2RYjwQJ
Ryobi Cordless 5 in. Random Orbit Sander
thd.co/2DWwo2X
CAMERA GEAR:
Canon M50 Mirrorless Camera
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj
Are you tired of not having accurate crosscuts? If you were like me, I used the small crosscut guide that came with my table saw. It was difficult to keep a long piece tight against the guide to get an accurate cut. It was time to upgrade to something better.
Today's project is all about making my life easier! I looked at quite a few different sleds and finally settled in on a design by King's Fine Woodworking. What I liked about it was the interchangeable zero clearance plates, the hold down t-tracks, and the saw stop for making repeatable cuts.
The build didn't go without at least one hiccup. The miter bar moved as I was laying the sled on it. That activator did it's job and locked it in. The only problem was the miter bar was slicing out an inch. All I could do was laugh it off. All in all, I'm very happy with how it came out and I look forward to using it in future projects.
Please leave a comment if there are any questions you have or if you feel like I missed explaining a step.
My website:
wolfridgewoodworking.com
SUBSCRIBE: youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA
King's Fine Woodworking Channel
bit.ly/2VWhTSq
Crosscut Sled Plans for purchase
bit.ly/2VXCSEB
PARTS USED (NOT affiliate links):
Rockler Hold Down Clamp
bit.ly/2suKnFx
Universal T-Track
bit.ly/2RPhfqO
Rockler Aluminum Miter Bar
bit.ly/2VVka0d
Kreg Solid Production Stop
amzn.to/2VUCJlg
TOOLS USED (NOT affiliate links):
RIDGID R4512 10 in. 13-Amp Cast Iron Table Saw
amzn.to/2GFNWCO
WEN 2.8 Amp 9 in. Benchtop Band Saw
thd.co/2T3I0oZ
Ryobi Cordless Fixed Base Trim Router
thd.co/2uamzdJ
Ryobi Cordless Brushless Hammer Drill/Driver
thd.co/2RYjwQJ
Ryobi Cordless 5 in. Random Orbit Sander
thd.co/2DWwo2X
CAMERA GEAR:
Canon M50 Mirrorless Camera
amzn.to/2ORcEQ5
Sigma 17-50mm f/2.8 Lens:
amzn.to/2QcB7Qj








