Uploaded November 2019 | Updated November 2026, 16 hours ago
Today's project comes courtesy of a few acorn caps I picked up in Connecticut while on a business trip. I don't know about you, but I'm always on the look out for things that I can put in resin and make something with. I was walking to lunch recently on a business trip and I saw all of these acorn caps on the ground. So I went in the break room and grabbed a few coffee cups and filled them up.
Once I got the acorn caps home, I needed to dry them out to prevent any moisture from interfering with the resin. I have personal experience with this and trust me, you don't want to waste the resin! I put them in a toaster oven at 200F for a couple of hours. I then immediately put them in a ziplock bag until I was ready to cast them in resin. The casting came out very nicely. I turned the resin and the walls are thin enough that the light comes through and you can see all of the different acorn caps in there.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
2 Corinthians 5:7 (NKJV)
For we walk by faith, not by sight.
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Materials used (affiliate):
TotalBoat High Performance Epoxy (2:1) w/ Slow Hardener: amzn.to/30c1ZJE
Alumilite Metallic Powder (Pearlescent): bit.ly/2Xwdze5
Alumilite Dye (Ocean Blue): bit.ly/2qnTbjc
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
HUT Ultra Gloss Plastic Polish: amzn.to/378VeI6
Abranet Sanding Screen: bit.ly/2lD2yJ3
Tools used (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Oneway Live Center: amzn.to/2mbWKXH
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools #1 Hollower: amzn.to/2oNFKaY
Easy Wood Tools Ci2-R2 Square Radius Negative Rake Carbide Cutter: amzn.to/374GutW
Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter: amzn.to/31uvjaa
Easy Wood Tools Ci5 Round Negative Rake Carbide Cutter: amzn.to/2QkA9EU
5/8" Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: amzn.to/2XoYbz0
1/2" Square Scraper: amzn.to/2pjpL53
SUBSCRIBE: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Music by Epidemic Sound (http://www.epidemicsound.com)
Today's project comes courtesy of a few acorn caps I picked up in Connecticut while on a business trip. I don't know about you, but I'm always on the look out for things that I can put in resin and make something with. I was walking to lunch recently on a business trip and I saw all of these acorn caps on the ground. So I went in the break room and grabbed a few coffee cups and filled them up.
Once I got the acorn caps home, I needed to dry them out to prevent any moisture from interfering with the resin. I have personal experience with this and trust me, you don't want to waste the resin! I put them in a toaster oven at 200F for a couple of hours. I then immediately put them in a ziplock bag until I was ready to cast them in resin. The casting came out very nicely. I turned the resin and the walls are thin enough that the light comes through and you can see all of the different acorn caps in there.
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
2 Corinthians 5:7 (NKJV)
For we walk by faith, not by sight.
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Materials used (affiliate):
TotalBoat High Performance Epoxy (2:1) w/ Slow Hardener: amzn.to/30c1ZJE
Alumilite Metallic Powder (Pearlescent): bit.ly/2Xwdze5
Alumilite Dye (Ocean Blue): bit.ly/2qnTbjc
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
HUT Ultra Gloss Plastic Polish: amzn.to/378VeI6
Abranet Sanding Screen: bit.ly/2lD2yJ3
Tools used (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Oneway Live Center: amzn.to/2mbWKXH
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools #1 Hollower: amzn.to/2oNFKaY
Easy Wood Tools Ci2-R2 Square Radius Negative Rake Carbide Cutter: amzn.to/374GutW
Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter: amzn.to/31uvjaa
Easy Wood Tools Ci5 Round Negative Rake Carbide Cutter: amzn.to/2QkA9EU
5/8" Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: amzn.to/2XoYbz0
1/2" Square Scraper: amzn.to/2pjpL53
SUBSCRIBE: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Music by Epidemic Sound (http://www.epidemicsound.com)










