Uploaded June 2026 | Updated November 2026, 3 hours ago
The PLC 'OR Out' instruction, explained: drive one output from several rung conditions the right way â and avoid the duplicate Out-coil pitfall. Here's how.
⥠QUICK ANSWER
The 'OR Out' instruction lets you drive a single output from more than one rung condition â it turns the output on if its own rung is true OR if a preceding output on the same address is true, effectively OR-ing the conditions together. The pitfall it solves is duplicate output coils: if you use a normal Out coil for the same output address in two different places, the last rung the PLC scans wins, so one of your conditions silently gets overwritten and the output doesn't behave as expected. OR Out is the correct way to combine multiple conditions for one output without that conflict. If an output "won't stay on" or only responds to one of several conditions, a duplicate Out coil is often the cause â and OR Out is the fix. Here it's shown on the P1-M622-16DR. The full contact-and-coil walkthrough is in the guide below.
đ FULL WRITTEN TUTORIAL + DOWNLOADS (contact & coil instructions)
accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions
đ WHAT YOU'LL LEARN
â What the 'OR Out' instruction does and when to use it
â How OR Out drives one output from several rung conditions
â The duplicate Out-coil pitfall â why the last-scanned rung wins
â How OR Out combines conditions without that conflict
â FREQUENTLY ASKED
Q: What is the 'OR Out' instruction in a PLC?
A: It drives an output on if its own rung is true or if a preceding output on the same address is true â OR-ing multiple conditions to control one output. The full walkthrough is in the guide.
Q: Why shouldn't I use the same Out coil twice?
A: With duplicate Out coils on one address, the last rung the PLC scans wins, so one condition overwrites the other and the output misbehaves. OR Out combines the conditions correctly instead.
đ Full contact & coil guide: accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions
đ MORE RESOURCES
âļ Series: accautomation.ca/series/productivity-plc
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #OROut #LadderLogicTips #Shorts
Regards,
Garry
ACC Automation
accautomation.ca
The PLC 'OR Out' instruction, explained: drive one output from several rung conditions the right way â and avoid the duplicate Out-coil pitfall. Here's how.
⥠QUICK ANSWER
The 'OR Out' instruction lets you drive a single output from more than one rung condition â it turns the output on if its own rung is true OR if a preceding output on the same address is true, effectively OR-ing the conditions together. The pitfall it solves is duplicate output coils: if you use a normal Out coil for the same output address in two different places, the last rung the PLC scans wins, so one of your conditions silently gets overwritten and the output doesn't behave as expected. OR Out is the correct way to combine multiple conditions for one output without that conflict. If an output "won't stay on" or only responds to one of several conditions, a duplicate Out coil is often the cause â and OR Out is the fix. Here it's shown on the P1-M622-16DR. The full contact-and-coil walkthrough is in the guide below.
đ FULL WRITTEN TUTORIAL + DOWNLOADS (contact & coil instructions)
accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions
đ WHAT YOU'LL LEARN
â What the 'OR Out' instruction does and when to use it
â How OR Out drives one output from several rung conditions
â The duplicate Out-coil pitfall â why the last-scanned rung wins
â How OR Out combines conditions without that conflict
â FREQUENTLY ASKED
Q: What is the 'OR Out' instruction in a PLC?
A: It drives an output on if its own rung is true or if a preceding output on the same address is true â OR-ing multiple conditions to control one output. The full walkthrough is in the guide.
Q: Why shouldn't I use the same Out coil twice?
A: With duplicate Out coils on one address, the last rung the PLC scans wins, so one condition overwrites the other and the output misbehaves. OR Out combines the conditions correctly instead.
đ Full contact & coil guide: accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions
đ MORE RESOURCES
âļ Series: accautomation.ca/series/productivity-plc
âļ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
âļ Free eBooks: accautomation.ca (subscribe for download)
đ RECOMMENDED HARDWARE
âļ Shop: automationdirect.com
âļ Parts Guide: accautomation.ca/purchase-find-parts
đŦ Questions? Drop a comment below.
đ New tutorials every Monday â Subscribe and hit the bell!
#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #OROut #LadderLogicTips #Shorts
Regards,
Garry
ACC Automation
accautomation.ca










