vaultfox | What to Do With Failed 3D Prints // Tips to Save Filament and Reduce Waste with 3D Printing @vaultfox | Uploaded March 2021 | Updated October 2024, 1 hour ago.
These are just a few of the ways I've taken my failed PLA prints and give them new life! Failed prints can really start to pile up (believe me, I've got a bin full) especially when you're just getting started, so hopefully having a back-up use for those inevitable failures will alleviate the annoyance of them happening in the first place.
grist house sponsor me plz
-----------------------------------------------------------------
my most-used supplies: VAULTFOX.net/supplies
support the channel, buy me a ko-fi!: ko-fi.com/VAULTFOX
instagram: instagram.com/VAULTFOX
twitter: twitter.com/vaultfox_
----------------------------------------------------------------
My Most Commonly Used 3D Printing Supplies (amazon links are affiliate links)
Creality CR-10s Printer: amzn.to/2T86i5M
Zyltech Filament (I use 1.75mm PLA): https://www.zyltech.com?aff=81
use code VAULTFOX5OFF for 5% off your order of Zyltech filament!
Foam Brushes: amzn.to/37J5M2R
Silicone Cups: amzn.to/2NxFCsU
UV Curing Lights: amzn.to/37FC7HR
Nitrile Gloves: amzn.to/3asn5qq
Super Glue + Accelerant: amzn.to/2J9mrDD
Metal Picks: amzn.to/38sIUUC
Plastic Clippers: amzn.to/33f536l
Filler Primer: amzn.to/2FsDNJa
Bondo: amzn.to/32lAKvL
Sanding Sponges: amzn.to/3rd9kTb
Mouse Sander: amzn.to/3nIRPry
Sander Pads: amzn.to/34xfMKJ
Wood Burning Tool: amzn.to/37EkXKZ
Respirator: amzn.to/32gSU1F
Respirator Refills: amzn.to/3bgpzaG
Safety Goggles: amzn.to/3bIoU1L
Nitrile Gloves: amzn.to/3hjLaQB
Varying grits of sandpaper: amzn.to/3imMfbG
These are just a few of the ways I've taken my failed PLA prints and give them new life! Failed prints can really start to pile up (believe me, I've got a bin full) especially when you're just getting started, so hopefully having a back-up use for those inevitable failures will alleviate the annoyance of them happening in the first place.
grist house sponsor me plz
-----------------------------------------------------------------
my most-used supplies: VAULTFOX.net/supplies
support the channel, buy me a ko-fi!: ko-fi.com/VAULTFOX
instagram: instagram.com/VAULTFOX
twitter: twitter.com/vaultfox_
----------------------------------------------------------------
My Most Commonly Used 3D Printing Supplies (amazon links are affiliate links)
Creality CR-10s Printer: amzn.to/2T86i5M
Zyltech Filament (I use 1.75mm PLA): https://www.zyltech.com?aff=81
use code VAULTFOX5OFF for 5% off your order of Zyltech filament!
Foam Brushes: amzn.to/37J5M2R
Silicone Cups: amzn.to/2NxFCsU
UV Curing Lights: amzn.to/37FC7HR
Nitrile Gloves: amzn.to/3asn5qq
Super Glue + Accelerant: amzn.to/2J9mrDD
Metal Picks: amzn.to/38sIUUC
Plastic Clippers: amzn.to/33f536l
Filler Primer: amzn.to/2FsDNJa
Bondo: amzn.to/32lAKvL
Sanding Sponges: amzn.to/3rd9kTb
Mouse Sander: amzn.to/3nIRPry
Sander Pads: amzn.to/34xfMKJ
Wood Burning Tool: amzn.to/37EkXKZ
Respirator: amzn.to/32gSU1F
Respirator Refills: amzn.to/3bgpzaG
Safety Goggles: amzn.to/3bIoU1L
Nitrile Gloves: amzn.to/3hjLaQB
Varying grits of sandpaper: amzn.to/3imMfbG