vaultfox | Painting Captain Rex’s Helmet from The Clone Wars @vaultfox | Uploaded August 2020 | Updated October 2024, 3 hours ago.
Captain Rex STL Files: galacticarmory.net/products/animated-captain-rex-helmet-3d-print-files?_pos=8&_sid=84ca23cda&_ss=r&aff=8
use code VAULTFOX for 10% off your order with Galactic Armory!

Also, I did NOT add any mesh to the back of the teeth (mostly due to not having any on hand) but if you're going to make a Rex helmet for the 501st or something, you'll need to add that as well. AND I completely forgot to mention how I did the hashmarks, but I just took a thin brush and painted them on with some black acrylic paint. Painted the greeblies and rangefinder in grey and glued the rangefinder on with E6000. Sorry about that, the footage just poofed :P As always, any questions feel free to ask!

check out my socials;
instagram: instagram.com/VAULTFOX
I'm also on tiktok!: tinyurl.com/ych7ddnb

--------------------------------
Products Used/Mentioned (all links are affiliate links!)
Montana Gold Shock White: shrsl.com/30qoc
Montana Gold Signal Blue: shrsl.com/30qoi

Painters Tape: amzn.to/3kuzld2
Vinyl Tape: amzn.to/30HgxzF
Jaig Eyes Template: tinyurl.com/y3k67ld2

Plastic Clippers: amzn.to/33f536l
Filler Primer: amzn.to/2FsDNJa
Bondo: amzn.to/32lAKvL
Respirator: amzn.to/32gSU1F
Safety Goggles: amzn.to/3bIoU1L
Nitrile Gloves: amzn.to/3hjLaQB
Varying grits of sandpaper (I use 120 and 220 mostly): amzn.to/3imMfbG
Creality CR-10 Printer: amzn.to/32lAywx
○ Zyltech Filament (I use 1.75mm PLA): https://www.zyltech.com?aff=81
use code VAULTFOX5OFF for 5% off your order of Zyltech filament!