Waste oil Burner WVO WMO @glumpy10

Uploaded October 2009 | Updated September 2026, 5 days ago

This is a proto type Waste Oil Burner I made that runs on WVO, WMO or any similar waste liquid.

This waste oil Burner uses forced air supplied by a reversed vacuum cleaner and gravity fed Veg oil. The drum is a 60L size and the burner will digest more than 12L of oil an hour at full power with this blower.
With the concept proven I will build a more substantial version from a water heater tank and line it with refractory and put more coils in it for heating water for the house for winter and my swimming pool.

The water in the bucket was 10L and was boiled in under 5 min. There is still a lot of efficiency to be gained from this setup.

$Waste oil Burner WVO WMO This is a proto type Waste Oil Burner I made that runs on WVO, WMO or any similar waste liquid. This waste oil Burner uses forced air supplied by a reversed vacuum cleaner and gravity fed Veg oil. The drum is a 60L size and the burner will digest more than 12L of oil an hour at full power with this blower. With the concept proven I will build a more substantial version from a water heater tank and line it with refractory and put more coils in it for heating water for the house for winter and my swimming pool. The water in the bucket was 10L and was boiled in under 5 min. There is still a lot of efficiency to be gained from this setup.$

$Aluminium Casting using the Mini Metal Furnace Melting Aluminium in a crucible in the mini Melting furnace. To see all my vids, go to https://www.youtube.com/user/glumpy10/videos. Please feel free to rededit this clip! This furnace is very cheap and easy to make and is ideally suited to those that just want to cast the occasional part and do not want to invest in proper refractory or build a complete furnace. The crucible was made from some thick wall pipe welded to some steel Plate. The burner is the drip style which uses blown air to push the oil into the preheated furnace consisting of a 60L metal drum. The oil burner provides more than sufficient heat to melt aluminum or copper. The brickwork around the drum act primarily as a heat shield rather than for any insulation value. The drum has stood up to over half a dozen fire ups now so is good for a decent amount of time before it eventually burns through. A basic aluminum plate was cast but once the aluminum is melted, a casting of any type can be made in any mold.$

Lister 8 Hp Running on used Vegetable oil. 20250711 160829

Melting copper and Aluminium scrapping with 300Kw Waste oil burner

How to build a Waste oil Burner for heating, scrapping or aluminium melting

Powering AC appliances Direct from Solar panels.

Oil Collection Pump for waste oil Building and description

waste oil burner for scrapping construction and first fire up