Uploaded March 2019 | Updated November 2026, 1 hour ago
I made a couple of DIY PLA chips by following the instructions on GadgetUK164's excellent video here:
youtu.be/sT4OBNvboJ0
I then tested the substitute PLAs in each of my five C64's.
The tests are not very scientific and were done more out of interest than anything else.
For an in-depth discussion of the workings of C64 PLA (and different replacement option including the PLAnkton) see Mindflareretro's excellent video here:
youtu.be/ofg33zk9uCA
UPDATE: I subsequently repeated this experiment on these 5 machines with some M27C512-90B6 Chips from Ebay. I am not sure if they are genuine or not. They are marked 'Korea' and claim to be made by ST Microelectronics.
These worked in ALL my 250407 boards (1*Rev A, 2*Rev B and 1*RevC) for at least 20 passes of the diagnostics cart and no capacitor was needed between CASRAM and Gnd. I got all excited and bought 10... Then I discovered that the chip does not work on my 250425 board. The diagnostics would not run and strange key presses were returned under normal operation. It has been suggested that removing Capacitor 203 on this board may improve things with this chip, but I could not find C203 on my particular 250425 board!
Here is a link. I have no affiliation and am not sure if they are real or not. YMMV.
ebay.co.uk/itm/STMicroelectronics-M27C512-90B6-27C512-64-x-8k-OTP-EPROM-PDIP28-x-1pc/162927594508?hash=item25ef3dcc0c:g:P2cAAOSwl~Vaml6t
Good luck all.
I made a couple of DIY PLA chips by following the instructions on GadgetUK164's excellent video here:
youtu.be/sT4OBNvboJ0
I then tested the substitute PLAs in each of my five C64's.
The tests are not very scientific and were done more out of interest than anything else.
For an in-depth discussion of the workings of C64 PLA (and different replacement option including the PLAnkton) see Mindflareretro's excellent video here:
youtu.be/ofg33zk9uCA
UPDATE: I subsequently repeated this experiment on these 5 machines with some M27C512-90B6 Chips from Ebay. I am not sure if they are genuine or not. They are marked 'Korea' and claim to be made by ST Microelectronics.
These worked in ALL my 250407 boards (1*Rev A, 2*Rev B and 1*RevC) for at least 20 passes of the diagnostics cart and no capacitor was needed between CASRAM and Gnd. I got all excited and bought 10... Then I discovered that the chip does not work on my 250425 board. The diagnostics would not run and strange key presses were returned under normal operation. It has been suggested that removing Capacitor 203 on this board may improve things with this chip, but I could not find C203 on my particular 250425 board!
Here is a link. I have no affiliation and am not sure if they are real or not. YMMV.
ebay.co.uk/itm/STMicroelectronics-M27C512-90B6-27C512-64-x-8k-OTP-EPROM-PDIP28-x-1pc/162927594508?hash=item25ef3dcc0c:g:P2cAAOSwl~Vaml6t
Good luck all.










