Uploaded May 2024 | Updated November 2026, 3 hours ago
In this video, I build a power supply for a sinclair QL by following an old schematic I found on the internet.
I talk through how the various power rails are created by the power supply and in the computer itself.
I put the power supply through several tests and eventually hook it up to a real Sinclair QL.
The finished product is pretty raw. I built it out of curiosity in order to try and learn something. I am not an electrical engineer, just a hobbyist with an interest. The video is for entertainment only. I am explaining it to myself as much as other people.
The schematic that the power supply is based on can be found here:
qlforum.co.uk/viewtopic.php?t=1231&sid=3ec386d4e2d8b262c7818ca09b8d70c9&start=20
It was designed by 1024MAK M.Kinsey
Example of MP1584 DC-DC Converter:
ebay.co.uk/itm/361535175546
15-0-15 3VA transformer I used:
esr.co.uk/shop/contents/en-uk/p42421_15---0---15v-2.0A-30VA-Open-Frame-Transformer.html
3D Printed power Plug Housing for Servo Cable:
thingiverse.com/thing:6610958/files
Early Video Showing ATX Conversion from Stock (inc 9v - rough audio):
youtu.be/l8P8wsdjCFo?si=rHvsZZitELLHZaIU
(No affiliations)
Good Luck All
In this video, I build a power supply for a sinclair QL by following an old schematic I found on the internet.
I talk through how the various power rails are created by the power supply and in the computer itself.
I put the power supply through several tests and eventually hook it up to a real Sinclair QL.
The finished product is pretty raw. I built it out of curiosity in order to try and learn something. I am not an electrical engineer, just a hobbyist with an interest. The video is for entertainment only. I am explaining it to myself as much as other people.
The schematic that the power supply is based on can be found here:
qlforum.co.uk/viewtopic.php?t=1231&sid=3ec386d4e2d8b262c7818ca09b8d70c9&start=20
It was designed by 1024MAK M.Kinsey
Example of MP1584 DC-DC Converter:
ebay.co.uk/itm/361535175546
15-0-15 3VA transformer I used:
esr.co.uk/shop/contents/en-uk/p42421_15---0---15v-2.0A-30VA-Open-Frame-Transformer.html
3D Printed power Plug Housing for Servo Cable:
thingiverse.com/thing:6610958/files
Early Video Showing ATX Conversion from Stock (inc 9v - rough audio):
youtu.be/l8P8wsdjCFo?si=rHvsZZitELLHZaIU
(No affiliations)
Good Luck All










