Making an Amiga Mouse work on an Archimedes @Plan-C
Making an Amiga Mouse work on an Archimedes  @Plan-C
Uploaded August 2017 | Updated November 2026, 19 hours ago
I needed something to navigate around the newly repaired machine. Archimedes mice are ridiculously expensive on Ebay etc so I made up a cable and hooked up my Amiga mouse to it.

Here I show you the pinouts (colour coded) at both ends of the cable and how I tested it.

The Amiga mouse has only 2 buttons. It is enough for me to confirm all is working but if you have a 3 button quadrature mouse then that will work all the better.

Good luck all.
Making an Amiga Mouse work on an ArchimedesBlackout Mini H Quad Step-by-Step Full Build Log Part 3Cyclone PCB Factory. Overview and first TestsAdding a Homemade Saver to a PSU / Inside a Commodore 64How to Spot Fake, Dangerous Power Leads  and Teardown of dodgy Gearbest T8 CNC Power SupplyNetgear Power Supply Repair (& Moan About Some eBay Chargers)Amiga 500 Plus black screen fixed (Older Vid - Rough Audio)Octopi and Smartplug Over-temp Shutoff Protection for 3D PrinterAmiga 500 (Heavy) PSU Brief Walkthrough & RepairFix Pixel 7 / 7 Pro (& Probably Other Pixels) No Mic After Screen Replacement. Cause Identified.Fatshark 18650 Battery Case Reverse Polarity Protection ModArchimedes A3000 Finally Solved!
Plan C |

Making an Amiga Mouse work on an Archimedes

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER