Uploaded September 2022 | Updated November 2026, 1 day ago
Today well be reviewing this Cuisinart CBK-200 bread-maker. I'd purchased this machine to replace the Breadman due to failing Teflon adhesion as demonstrated in the last video. This gives us not only an opportunity to do another review, but to compare the two appliances.
Breadman
amzn.to/42dBxvz
Cuisinart CBK-200 Convection Bread Maker
amzn.to/3yI1iXc
After an unboxing we find that the extras provided for the Breadman were a bit better, also on the Breadman the mixer swivels down. The manual for the Cuisinart was better written than the Breadman. The Breadman was also found to have typos in our recipes.
Our first attempt uses the corrected Breadman recipe. Note the Breadman has an auto seed dropping feature, this machine does not, only a notification to do so manually.
While I let it be on the first attempt, if found that initial mixing needs a helping hand as far as dough getting caught on the sidewalls and not mixing in. Also seeds need some manual help for good distribution. I did assist on the second attempt.
On a 3rd attempt we went with a Challah as a random selection. We find the 2lb loafs are larger than the machine can handle and may dial it back to 1.5. That said the machine worked well.
As an Amazon Associate I earn from qualifying purchases. If you choose to purchase any of these items the links above provide a small commission that I use towards the making of these videos at no additional cost to you.
#breadbaking #breadmaker #breadmachine
Today well be reviewing this Cuisinart CBK-200 bread-maker. I'd purchased this machine to replace the Breadman due to failing Teflon adhesion as demonstrated in the last video. This gives us not only an opportunity to do another review, but to compare the two appliances.
Breadman
amzn.to/42dBxvz
Cuisinart CBK-200 Convection Bread Maker
amzn.to/3yI1iXc
After an unboxing we find that the extras provided for the Breadman were a bit better, also on the Breadman the mixer swivels down. The manual for the Cuisinart was better written than the Breadman. The Breadman was also found to have typos in our recipes.
Our first attempt uses the corrected Breadman recipe. Note the Breadman has an auto seed dropping feature, this machine does not, only a notification to do so manually.
While I let it be on the first attempt, if found that initial mixing needs a helping hand as far as dough getting caught on the sidewalls and not mixing in. Also seeds need some manual help for good distribution. I did assist on the second attempt.
On a 3rd attempt we went with a Challah as a random selection. We find the 2lb loafs are larger than the machine can handle and may dial it back to 1.5. That said the machine worked well.
As an Amazon Associate I earn from qualifying purchases. If you choose to purchase any of these items the links above provide a small commission that I use towards the making of these videos at no additional cost to you.
#breadbaking #breadmaker #breadmachine
![I Built a Desktop AI Assistant with an ESP32! Part 2
In Part 2 of building my custom 3D-printed AI desktop assistant, we run the initial demo and go through options during which time an issues was found and analyzed causing a redesign of the unit which was then re-tested and demoed
TIMESTAMPS:
0:00 - Recap of Part one
1:06 - Demo of Initial Configuration and Options
4:03 - Basic Acoustic Diagnostics
6:45 - Design Failure and Acoustic Analysis
9:07 - The Re-Design
10:03 - Assembly
11:10 - Re-Redesign and Assembly
17:17 - Post Rebuild Testing
HARDWARE & COMPONENTS USED:
- ESP32 Development Board
- OLED / TFT Display Module
- I2S Microphone & Audio Amplifier / Speaker
- Custom 3D Printed Chassis
3D PRINT FILES (STLs):
https://makerworld.com/en/models/3324770-lilygo-t5-e-paper-esp32-case
ESP32 Software for the project: https://github.com/jordancrubin/ESP32-AI-Module
WATCH PART 1 (Firmware & Live AI Demo): https://www.youtube.com/watch?v=0tuumnskRkU
ESP32 N16R8
https://amzn.to/4enfSts
ICS43434 Microphone [2 for beamforming]
https://amzn.to/4enfSts
2Pack 8 Ohm 3W speakers
https://amzn.to/3PgiSNR
BME680 Envitonmental monitoring sensor
https://amzn.to/4teaRHc
MAX98357 Amplifier 3W
https://amzn.to/4teaRHc
USB C Power connectors
https://amzn.to/4teaRHc
Protoboard
https://amzn.to/496qjhk
Crimp connector kit
https://amzn.to/48zZiCK
As an Amazon Associate I earn from qualifying purchases. If you choose to purchase any of these items the links above provide a small commission that I use towards the making of these videos at no additional cost to you.
#ESP32 #3DPrinting #ArtificialIntelligence #DIYTech #Maker #EmbeddedSystems #DesktopSetup I Built a Desktop AI Assistant with an ESP32! Part 2](https://i.ytimg.com/vi/cnIluqcgAWM/mqdefault.jpg)
![Aerogarden Bounty Elite Vs. Amazons Cheapest Comparable Knockoff [UPDATE]
Folks have asked for an update on the Aerogarden Bounty Knockoff, and I happened to be up in New England with some more info on the unit after four months along with a moving adventure with a subsequent post move setup down south.
Bounty Elite: https://amzn.to/4019mxX
AFFLAT unit: https://amzn.to/3Jf8cbv
AeroGarden Heirloom Salad Greens Mix Seed Pod Kit - 6-Pod
https://amzn.to/3lAsCUm
AeroGarden Sweet Bell Peppers Seed Pod Kit (9-pod)
https://amzn.to/3lzI9nx
AeroGarden Liquid Nutrients (1 Liter)
https://amzn.to/3LOvEiI
As an Amazon Associate I earn from qualifying purchases. If you choose to purchase any of these items the links above provide a small commission that I use towards the making of these videos at no additional cost to you.
#aerogarden #hydroponics #diygarden Aerogarden Bounty Elite Vs. Amazons Cheapest Comparable Knockoff [UPDATE]](https://i.ytimg.com/vi/cpKWoYa6Mnw/mqdefault.jpg)








