Uploaded February 2014 | Updated September 2026, 2 weeks ago

---

FACEBOOK: facebook.com/MAT2COMPOSITES
TWITTER: @matthieutje65
INSTAGRAM: MatthieuLibeert
WEBSITE: matthieulibeert.webs.com

Watch introduction video of this project here!
https://www.youtube.com/watch?v=Ef2nE...

Links:

VOSSCHEMIE: (vg alu epoxy) vosschemie-benelux.com
----------------------------------------­----------------------------------------­-------------------

EASYCOMPOSITES: (Chemical release agent)
easycomposites.co.uk/products/release-agents/easylease-chemical-release-agent.aspx

EASYCOMPOSITES: (Prepreg)
easycomposites.co.uk/Category/Fabric-and-Reinforcement/Pre-Preg-Carbon-Fibre.aspx

EASYCOMPOSITES: (Vacuumpump) easycomposites.co.uk/products/vacuum-bagging/composites-vacuum-pump.aspx


New video online every Wednesday at 18:00 Belgian time!
Schedule:

1 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction)
https://www.youtube.com/watch?v=Ef2nE...

1 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction)
https://www.youtube.com/watch?v=Ef2nE...

8 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 2-7 (CNC+2K Paint)
https://www.youtube.com/watch?v=fWiPl...

15 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 3-7 (Casting ALU VG)
https://www.youtube.com/watch?v=WzvLM...

22 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 4-7 (Prepreg mould)
youtube.com/watch?v=cJNPugX_M-c

29 January 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 5-7 (Complex moulds)
youtube.com/watch?v=iclRXG6puNw

5 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 6-7 (First Parts and Clear)
youtube.com/watch?v=Hbq05i0Kj1Q

12 February 2014
Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 7-7 (Silicone bag and parts)
youtube.com/watch?v=KKRlE-_Ro1A

In this video I show you how to make perfectly finished carbonfiber parts, you can see some textreme, Hybrid carbonfiber and Prepreg carbonfiber parts being painted with an airgun, brush and a roller

After the succes of a previous 6-part tutorial from mouldmaking till prepreg parts, here are some new ones! you can see the introduction of the previous tutorials by clicking on following link: https://www.youtube.com/watch?v=1PpKM...

In the videos coming online you will get some information on 2K spraypaint, How the first moulds were CNC-Milled, The use of Vosschemie VG ALU EPOXY, using Prepreg Carbonfiber to make moulds, how an other mould was made to enable silicone vacuumbags, how parts are clearcoated and many more. So if all of this sounds interesting, don't forget to subscribe ;)

Track ID on background: Blackmill - Spirit Of Live