Uploaded December 2017 | Updated November 2026, 4 hours ago
We couldn't resist to try out some more Iodides for a possible thermochromism. So we also made a small amount of Thallium(I)-Iodide and heated it. It quickly turned orange-red but it took about 3 hours to completely turn back to yellow, much like with HgI2.
The reason for the color change is known but we were unable to find a suitable explanation for why it really happens. So this is our explanation by comparing it to Silver and also to its own group like Ga and In for example we think Tl-Tl bonds might be a good explanation here:
At room temperature, the yellow form has an orthorhombic lattice. AB structures often crystallize in the so-called NaCl-type lattice. As Thallium is much like Silver and Silver possesses a property called Argentophilia (we explained that in the other video) or Mercury, for example, likes to build up Hg-Hg units, we think, that Thallium has quite a Thallophlilia as well. This causes the NaCl lattice to distort to the TlI-lattice, which is orthorhombic. At elevated temperatures, a CsCl-type structure is adopted, which also causes the color shift. Here the Tl-Tl interactions become weaker, the Tl-Tl distances increase and the I-I distances decrease.
It doesn't matter whether a NaCl or CsCl structure is chosen in the end, this is just due to the sizes of the ions but basically what you end with is a thermal cracking of these Tl-Tl "bonds".
As always, if you have a better explanation we would really love to hear it.
We couldn't resist to try out some more Iodides for a possible thermochromism. So we also made a small amount of Thallium(I)-Iodide and heated it. It quickly turned orange-red but it took about 3 hours to completely turn back to yellow, much like with HgI2.
The reason for the color change is known but we were unable to find a suitable explanation for why it really happens. So this is our explanation by comparing it to Silver and also to its own group like Ga and In for example we think Tl-Tl bonds might be a good explanation here:
At room temperature, the yellow form has an orthorhombic lattice. AB structures often crystallize in the so-called NaCl-type lattice. As Thallium is much like Silver and Silver possesses a property called Argentophilia (we explained that in the other video) or Mercury, for example, likes to build up Hg-Hg units, we think, that Thallium has quite a Thallophlilia as well. This causes the NaCl lattice to distort to the TlI-lattice, which is orthorhombic. At elevated temperatures, a CsCl-type structure is adopted, which also causes the color shift. Here the Tl-Tl interactions become weaker, the Tl-Tl distances increase and the I-I distances decrease.
It doesn't matter whether a NaCl or CsCl structure is chosen in the end, this is just due to the sizes of the ions but basically what you end with is a thermal cracking of these Tl-Tl "bonds".
As always, if you have a better explanation we would really love to hear it.


![Titanium Chemisty: Titanium in HF [8x faster]
The preparations for this experiment started with us finding a line in an old chemistry textbook saying Ti would dissolve quite well in HF. As you probably know, it usually takes high temperatures and long periods until Ti dissolves in anything (check out our TiCl3 video for that). Therefore, we thought we could try this with HF, note the HF has around 40% concentration so around the HCl and the temperature was around 20°C when we did that so at cooler temperatures.
We filled a test tube with 5 ml of HF (40%) and added a small piece of Ti wire. The reaction started immediately quickly producing a purple - pink solution At some point, we added a bit of water. The color changes to green. In the end, you can see two layers, the upper one is the aqueous Ti-complex and the bottom one is insoluble [SiF6](2-).
The question is why does it react with HF better than with HCl? And we cant really find a suitable explanation. The fact that HF attacks glass is probably something different here. It could be because very stable Fluorocomplexes are formed. Elements like Zirconium, Titanium, even Iron are known to form stable Fluoride complexes although usually, Fluoride is a weak ligand. Titanium(III) and (IV) especially in acids also tends to form Titanyl, TiO2 and hydrated oxygen-rich species. So perhaps the equilibrium shifts towards the fluoride here because it resists the back-reaction to some extend and the passive layer is therefore destroyed.
And to be honest we have no clue what is happening in this experiment at all. Even the Gmelin does not really talk a lot about the chemistry between HF and Ti metal. According to other books, the following reaction is very likely:
Much like with HCl, HF dissolves the Ti to form Ti(III). For the chloro-species, there are many isomers much like with Chromium. While the [Ti(H2O)6]Cl3 and also the [Ti(H2O)6]F3 are said to be purple-red their isomer, [Ti(H2O)4Cl2]Cl is green. And we think this is the case for the fluoro complex as well.
The question remains why this happens here and not the other way around? What might happen is that the pure Hexaqua-complex acts as a cationic acid and is deprotanted as the conc. of H(+) from HF is diluted with the addition of water. Then the famous Titanium-Oxy and Hydroxy-species form and perhaps somewhere in this cycle Fluoride can take the positions.
If you find anything about the actual reaction we would be really interested to hear about it.
Also if you ask yourself why we think the colors here are purple and green. We ran this experiment twice before with different concentrations and it would always self-heat to a point where it got out of control producing much more intense colored compounds which were really deep purple and grass green. Titanium Chemisty: Titanium in HF [8x faster]](https://i.ytimg.com/vi/Z44cBRfHm_k/mqdefault.jpg)







![Thermochromism: Tl2[HgI4]
This is the last video where we explore the different Tetraiodomerucrates. The explanation is probably the same as for Cu and Ag here, although it is really hard to see the result. According to literature, it is supposed to turn red in the process of heating it.
It is a bit hard to see but in the beginning the compound was dark yellow and in the end it was red. Thermochromism: Tl2[HgI4]](https://i.ytimg.com/vi/aJfFY2iIgxU/mqdefault.jpg)