Uploaded May 2017 | Updated November 2026, 4 hours ago
As explained before Palladium favors bonding to sulphur and many reactions between Pd and S can become quite violent. We thought perhaps it could be possible to react it with Selenium as well. So here we heat Pd metal on a small pile of black Selenium.
Now the system Pd-Se is quite complicated depending on the conc. of Pd, the temperature, the time and other factors a lot of mixed compositions can form as well.
We couldn't find much on the actual reaction as PdSe is usually prepared in a different way. Old reports talk about a fast reaction between Se and Pd forming a brown-black compound which does withstand temperature and will eventually turn grey-white.
As you saw in the video the Selenium sublimated off in the end or went yellow into the gas-phase leaving behind some small black-white flakes. The white stuff should be Selenium dioxide but the black rest could be PdSe.
Note that many metal foils tend to crumble when heated so perhaps the Palladium turned into a small ball and was covered by Selenium but the reaction was definitely different and way faster than the one with Sulphur so perhaps there really was some Selenide formed here.
In addition we tried similar reactions with Tellurium and Arsenic and sometimes it would really appear to melt into the other compound even at much lower temperatures (like for Se and Te) and sometimes although we were heating the tube till it became soft nothing happened (for S and As). Which is why we assume at least for Se and Te a reaction happens.
As explained before Palladium favors bonding to sulphur and many reactions between Pd and S can become quite violent. We thought perhaps it could be possible to react it with Selenium as well. So here we heat Pd metal on a small pile of black Selenium.
Now the system Pd-Se is quite complicated depending on the conc. of Pd, the temperature, the time and other factors a lot of mixed compositions can form as well.
We couldn't find much on the actual reaction as PdSe is usually prepared in a different way. Old reports talk about a fast reaction between Se and Pd forming a brown-black compound which does withstand temperature and will eventually turn grey-white.
As you saw in the video the Selenium sublimated off in the end or went yellow into the gas-phase leaving behind some small black-white flakes. The white stuff should be Selenium dioxide but the black rest could be PdSe.
Note that many metal foils tend to crumble when heated so perhaps the Palladium turned into a small ball and was covered by Selenium but the reaction was definitely different and way faster than the one with Sulphur so perhaps there really was some Selenide formed here.
In addition we tried similar reactions with Tellurium and Arsenic and sometimes it would really appear to melt into the other compound even at much lower temperatures (like for Se and Te) and sometimes although we were heating the tube till it became soft nothing happened (for S and As). Which is why we assume at least for Se and Te a reaction happens.






![Thermochromism: Tl2[HgI4]
This is the last video where we explore the different Tetraiodomerucrates. The explanation is probably the same as for Cu and Ag here, although it is really hard to see the result. According to literature, it is supposed to turn red in the process of heating it.
It is a bit hard to see but in the beginning the compound was dark yellow and in the end it was red. Thermochromism: Tl2[HgI4]](https://i.ytimg.com/vi/aJfFY2iIgxU/mqdefault.jpg)


![Tellurium Chemistry: Two flame colors of Tellurium [hard to see]
If Te compounds are burned the flame color is said to be a mix of green and blue and if the right temperatures are chosen a green flame can be seen in the colder part of the burner while a blue flame shows in the hot parts. It seems to be due to an oxidation taking place. Not only is the Te ionized when heated in a hot flame but also oxidized by the air at the elevated temperature. The green flame is supposed to be the oxidation to Te(IV) while the blue flame is the oxidation to Te(VI).
There is another element in the PSE that changes color depending on the temperature of the flame and that is Thulium...which we unfortunately dont have at the moment. But we will order some, soon and try that.
What you can see here is us holding a bit of Te at the very end of the flame of a burner then moving it closer to the core of the flame. At first the flame really seems to be slightly greenish. The cam doesnt pick it up well but it was way greener than the core flame which is blue. Maybe someone can try this with a better cam again.
Also if you find more information on this reaction we would be happy to get some additional information on this as it was hard to find anything on this phenomenon. Tellurium Chemistry: Two flame colors of Tellurium [hard to see]](https://i.ytimg.com/vi/axVQjKBFsbs/mqdefault.jpg)
