Uploaded November 2017 | Updated November 2026, 1 day ago
Much like SO2, SeO2 will dissolve in water to form H2SeO3 (while the equilibrium for TeO2 is shifted far towards the oxide side, so no real acid is formed there). H2SO3 will oxidize quite readily to H2SO4 while H2SeO3 is somewhat stable.
When tested with some pH-paper it shows a red color indicating an acid.
The reason for this difference is because Sulfur compounds are often easily oxidized, for example from S(IV) to S(VI), hence H2SO4 forms quite easily, while the redox potential for said reaction for Se(IV) to Se(VI) is much higher. This is even used in nature and the reason why Selenium has some importance. Selenocysteine and Selenomethionine, the so-called Seleno-amino acids can form peptides and much more. The metabolism is similar to the sulfur analogs but often tends to undergo reductive reactions, while sulfur does oxidative reactions.
In an upcoming video, we will try to shine some light on the differences in Sulfur, Selenium and Tellurium redox-chemistry.
Much like SO2, SeO2 will dissolve in water to form H2SeO3 (while the equilibrium for TeO2 is shifted far towards the oxide side, so no real acid is formed there). H2SO3 will oxidize quite readily to H2SO4 while H2SeO3 is somewhat stable.
When tested with some pH-paper it shows a red color indicating an acid.
The reason for this difference is because Sulfur compounds are often easily oxidized, for example from S(IV) to S(VI), hence H2SO4 forms quite easily, while the redox potential for said reaction for Se(IV) to Se(VI) is much higher. This is even used in nature and the reason why Selenium has some importance. Selenocysteine and Selenomethionine, the so-called Seleno-amino acids can form peptides and much more. The metabolism is similar to the sulfur analogs but often tends to undergo reductive reactions, while sulfur does oxidative reactions.
In an upcoming video, we will try to shine some light on the differences in Sulfur, Selenium and Tellurium redox-chemistry.


![Thermochromism: Tl2[HgI4]
This is the last video where we explore the different Tetraiodomerucrates. The explanation is probably the same as for Cu and Ag here, although it is really hard to see the result. According to literature, it is supposed to turn red in the process of heating it.
It is a bit hard to see but in the beginning the compound was dark yellow and in the end it was red. Thermochromism: Tl2[HgI4]](https://i.ytimg.com/vi/aJfFY2iIgxU/mqdefault.jpg)


![Tellurium Chemistry: Two flame colors of Tellurium [hard to see]
If Te compounds are burned the flame color is said to be a mix of green and blue and if the right temperatures are chosen a green flame can be seen in the colder part of the burner while a blue flame shows in the hot parts. It seems to be due to an oxidation taking place. Not only is the Te ionized when heated in a hot flame but also oxidized by the air at the elevated temperature. The green flame is supposed to be the oxidation to Te(IV) while the blue flame is the oxidation to Te(VI).
There is another element in the PSE that changes color depending on the temperature of the flame and that is Thulium...which we unfortunately dont have at the moment. But we will order some, soon and try that.
What you can see here is us holding a bit of Te at the very end of the flame of a burner then moving it closer to the core of the flame. At first the flame really seems to be slightly greenish. The cam doesnt pick it up well but it was way greener than the core flame which is blue. Maybe someone can try this with a better cam again.
Also if you find more information on this reaction we would be happy to get some additional information on this as it was hard to find anything on this phenomenon. Tellurium Chemistry: Two flame colors of Tellurium [hard to see]](https://i.ytimg.com/vi/axVQjKBFsbs/mqdefault.jpg)


![Arsenic Chemistry: As2Hg3 or Fleitmanns test
This is an interesting test for Arsenic(III). Many people try to find Arsenic the classic way by burning AsH3. I had to do this test in my Analytical Course at the university and the stuff blew up twice shooting glass shards, As-compounds and a lot of other stuff into my face. So we try to show different methods here.
Here, we prepared a mixture of Sodium Arsenite and Potassium Hydroxide and added some water. To this some small Aluminium flakes were added and the mixture heated. On the top of the test tube (make sure it is clean and doesnt have any Arsenic on it) we stuck a wet piece of paper which was soaked in HgCl2 first to the glass wall. After some time it turns brown.
So what is happening?
KOH and Al react to K[Al(OH)4] producing a lot of nascent Hydrogen. The Hydrogen reacts with the As(III) reducing it to As(-III) to form the compound AsH3. So the bigger brother of NH3 (Ammonia) and PH3 (Phosphine).
Now for Marshs test you do pretty much the same until now, but with Acid instead of Base. And yes you can run this experiment in acid as well, which is then called Gutzeits test.
Now usually you would burn the AsH3 to form H2O and As which can be depleted onto a piece of ceramics and further tested. We go a different approach here and mix it with HgCl2 on the paper. First AsH2HgCl forms, then two of these react with an additional HgCl2 to form AsH(HgCl)2 which reacts with an additional AsH2HgCl to finally form As2Hg3.
While this forms, the color changes due to the different species being present in between from yellow to brown.
Now it is hard to find anything on this compound, some call it Arsenic(II)mercurate(-II) (which is probably better called Mercuride....) , others call it Mercury(II)Arsenide(-III) and some say it is an amalgamate. Comparing the different electronegativities you see that an Arsenide seems better especially as there is no further redox reaction involved in the process as As is already As(-III) the only side products to all these recombinations is HCl. So, we suggest Mercury(II)-Arsenide(-III) seems most plausible.
Now you can also use Silver for this test as Silvernitrate. What will happen is:
AsH3 and 6 AgNO3 react to form [Ag3As x 3 AgNO3] which is yellow, but reacts with the water present to form brown-black elemental Silver and H3AsO3 as well as HNO3, which is produced in each step. Arsenic Chemistry: As2Hg3 or Fleitmanns test](https://i.ytimg.com/vi/bZ4WtMu87jM/mqdefault.jpg)

