Arsenic Chemistry: As2Hg3 or Fleitmanns test @colorfulchemistry2569
Arsenic Chemistry: As2Hg3 or Fleitmanns test  @colorfulchemistry2569
Uploaded October 2016 | Updated November 2026, 4 hours ago
This is an interesting test for Arsenic(III). Many people try to find Arsenic the classic way by burning AsH3. I had to do this test in my Analytical Course at the university and the stuff blew up twice shooting glass shards, As-compounds and a lot of other stuff into my face. So we try to show different methods here.

Here, we prepared a mixture of Sodium Arsenite and Potassium Hydroxide and added some water. To this some small Aluminium flakes were added and the mixture heated. On the top of the test tube (make sure it is clean and doesn't have any Arsenic on it) we stuck a wet piece of paper which was soaked in HgCl2 first to the glass wall. After some time it turns brown.

So what is happening?

KOH and Al react to K[Al(OH)4] producing a lot of nascent Hydrogen. The Hydrogen reacts with the As(III) reducing it to As(-III) to form the compound AsH3. So the bigger brother of NH3 (Ammonia) and PH3 (Phosphine).

Now for Marsh's test you do pretty much the same until now, but with Acid instead of Base. And yes you can run this experiment in acid as well, which is then called Gutzeit's test.

Now usually you would burn the AsH3 to form H2O and As which can be depleted onto a piece of ceramics and further tested. We go a different approach here and mix it with HgCl2 on the paper. First AsH2HgCl forms, then two of these react with an additional HgCl2 to form AsH(HgCl)2 which reacts with an additional AsH2HgCl to finally form As2Hg3.

While this forms, the color changes due to the different species being present in between from yellow to brown.

Now it is hard to find anything on this compound, some call it Arsenic(II)mercurate(-II) (which is probably better called Mercuride....) , others call it Mercury(II)Arsenide(-III) and some say it is an amalgamate. Comparing the different electronegativities you see that an Arsenide seems better especially as there is no further redox reaction involved in the process as As is already As(-III) the only side products to all these recombinations is HCl. So, we suggest Mercury(II)-Arsenide(-III) seems most plausible.

Now you can also use Silver for this test as Silvernitrate. What will happen is:

AsH3 and 6 AgNO3 react to form [Ag3As x 3 AgNO3] which is yellow, but reacts with the water present to form brown-black elemental Silver and H3AsO3 as well as HNO3, which is produced in each step.
Arsenic Chemistry: As2Hg3 or Fleitmanns testSelenium Chemistry: Red Selenium (Thiourea Method)Ruthenium Chemistry: Ruthenium(VIII)Oxide (H2SO4 + KMnO4)Manganese Chemistry: Mn(III) ?Silver Chemistry: Silveriodide and Ammonia (?)Arsenic Chemistry: Nickelarsenite (Green)Thermochromism: Silver(I)IodideMercury Chemistry: Mercury(I)chromateCopper Chemistry: Copper(I) ChlorideThermochromism: Lead(II)IodideCopper Chemistry: [CuBr4](2-)Platinum Chemistry: Distinguish between Pt and Pd (SnCl2)
Colorful Chemistry |

Arsenic Chemistry: As2Hg3 or Fleitmann's test

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER