Uploaded September 2016 | Updated November 2026, 7 hours ago
As Copper(II) Sulfate and Potassium Chloride are mixed nothing happens. As soon as Sodium Sulfite is added insoluble Cu(I)-Chloride forms. The Sulfite reduces the Copper(II) to Copper(I) which combines with the Chloride in solution to form insoluble CuCl.
Cu(I) compounds are quite rare in aqueous chemistry. The reason for this is the fact, that in comparison to Cu(I) Cu(II) has a 4 times higher Hydrationenergy/enthalpy which stabilizes the oxidation state +II and makes aqueous Cu(II) chemistry the standard chemistry while Cu(I) will disproportionate if brought into solution.
There are some exceptions however. One example is the [Cu(CN)4](3-) we showed in another video. If the ligand stabilizes the lower oxidation state better and is soluble after complexation some aqueous Cu(I) chemistry is possible. Same goes for low Cu(I) conc.
On the other hand there are a lot of insoluble stable copper(I) compounds like the Oxide or the Sulfide as well as all the halogenides and pseudohalogenides. Copper(I)Oxide is the thing you see when you look at copper metal. If you polish copper metal really well you will be able to see coppers true color. If left at the air it will oxidize again forming a thin layer of red Cu(I)Oxide. This is compound is also seen as product of the famous Fehling Reaction which turns red due to the formation of Cu(I)Oxide.
This is where most books and texts end on the chemistry of Cu(I) but as we have some space here we would like to share some extra information since the reaction in the video doesn't require a lot of information (we had a lot of redox-chemistry already).
Another way to make Cu(I) which will be shown in a future video is the synproportionation at elevated temperatures of Cu(0) and Cu(II). If this is carried out in HCl a soluble complex forms:
H[CuCl2] where Cu(I) is linear coordinated. (Copper(I) has a lot of linear, trigonal and tetrahedral coordinations while Copper(II) almost always has octahedra ).
If water is added HCl and CuCl form. CuCl can be dissolved in HCl again forming H[CuCl2] but also in Ammonia to form [Cu(NH3)2]Cl or if more Ammonia is added also [Cu(NH3)4]Cl where copper(I) is now tetrahedrally coordinated.
This last compound has some interesting applications as it absorbs Carbonmonoxide and could theoretically be used as a CO filter. [Cu(NH3)4]Cl will react with water and CO to form
[Cu(CO)(H2O)2Cl](-). If instead of CO O2 is used so the compound left to oxidize on air it will turn blue under the formation [Cu(NH3)4](2-) which we featured in another video already.
As Copper(II) Sulfate and Potassium Chloride are mixed nothing happens. As soon as Sodium Sulfite is added insoluble Cu(I)-Chloride forms. The Sulfite reduces the Copper(II) to Copper(I) which combines with the Chloride in solution to form insoluble CuCl.
Cu(I) compounds are quite rare in aqueous chemistry. The reason for this is the fact, that in comparison to Cu(I) Cu(II) has a 4 times higher Hydrationenergy/enthalpy which stabilizes the oxidation state +II and makes aqueous Cu(II) chemistry the standard chemistry while Cu(I) will disproportionate if brought into solution.
There are some exceptions however. One example is the [Cu(CN)4](3-) we showed in another video. If the ligand stabilizes the lower oxidation state better and is soluble after complexation some aqueous Cu(I) chemistry is possible. Same goes for low Cu(I) conc.
On the other hand there are a lot of insoluble stable copper(I) compounds like the Oxide or the Sulfide as well as all the halogenides and pseudohalogenides. Copper(I)Oxide is the thing you see when you look at copper metal. If you polish copper metal really well you will be able to see coppers true color. If left at the air it will oxidize again forming a thin layer of red Cu(I)Oxide. This is compound is also seen as product of the famous Fehling Reaction which turns red due to the formation of Cu(I)Oxide.
This is where most books and texts end on the chemistry of Cu(I) but as we have some space here we would like to share some extra information since the reaction in the video doesn't require a lot of information (we had a lot of redox-chemistry already).
Another way to make Cu(I) which will be shown in a future video is the synproportionation at elevated temperatures of Cu(0) and Cu(II). If this is carried out in HCl a soluble complex forms:
H[CuCl2] where Cu(I) is linear coordinated. (Copper(I) has a lot of linear, trigonal and tetrahedral coordinations while Copper(II) almost always has octahedra ).
If water is added HCl and CuCl form. CuCl can be dissolved in HCl again forming H[CuCl2] but also in Ammonia to form [Cu(NH3)2]Cl or if more Ammonia is added also [Cu(NH3)4]Cl where copper(I) is now tetrahedrally coordinated.
This last compound has some interesting applications as it absorbs Carbonmonoxide and could theoretically be used as a CO filter. [Cu(NH3)4]Cl will react with water and CO to form
[Cu(CO)(H2O)2Cl](-). If instead of CO O2 is used so the compound left to oxidize on air it will turn blue under the formation [Cu(NH3)4](2-) which we featured in another video already.


For a full explanation see the video on [CuCl4](2-).
As an excess of Potassium Bromide is added to a copper sulfate solution the red [CuBr4](2-) is formed. Copper Chemistry: [CuBr4](2-)](https://i.ytimg.com/vi/iIAy9dr_V6A/mqdefault.jpg)



![Thallium Chemistry: Ferrocyanide and Chromate in comparison
A yellow (hard to see on camera) Potassium Ferrocyanide solution (left) and a very dilute yellow Potassium Chromate solution (right) are prepared. Some drops of a Thallium(I) Nitrate solution are added to both of them.
Although both compounds are yellow for Potassium and the other Alkali metals (Thallium(I) can under certain circumstances be treated as an alkali metal-ion) the Ferrocyanide one is white.
We discovered this effect when we tried to prepare a bunch of Thallium compounds. It appears that many Ferrocyanides especially with d-Metals as counterions show completely different colors.
We are still not sure how exactly the counterion takes part in the coloration of complexes and will discuss this in a further video on Ferrocyanides. One idea is, as we visualized some structure data for Tl4[Fe(CN)6] that the Tl has trigonal prismatic and octahedral coordination (N-coordinated by the Cyanides backside).
So this has either to do with the Lewis-Acidity (electrophilic) of the counterion, pulling some of the ligands electron density away from the coordinated metal (Fe) thereby lowering the ligand field splitting and causing a red-shift.
Or for d-Metals as counterions (we checked their crystal structure as well) there are octahedra (N-coordinated) around the counterions as well. So we might have a second ligand field splitting here causing a mix of two colors.
We will try to find out more about the actual mechanism of this (hopefully) soon.
Still we found this effect quite interesting, as Thallium compounds usually are not colored (much like Alkali Metals or Silver) and the color here comes from the Chromate and Ferrocyanide that the products although the complex part has the same color end up in different colors. Thallium Chemistry: Ferrocyanide and Chromate in comparison](https://i.ytimg.com/vi/jQVU1c7zH34/mqdefault.jpg)
![Mercury Chemistry: Co[Hg(SCN)4]
In this video, we make an interesting compound Co[Hg(SCN)4]. It is prepared by mixing a Hg solution with NH4SCN and adding some CoCl2. The compound does not form right away but after a while, tiny blue parts can be seen all over the solution. They quickly fall to the bottom where after a night bigger flakes had formed as well.
As you can the solution is clear in the end, so all the CoCl2 has reacted to form the insoluble Co[Hg(SCN)4]. As they grow so slowly often bigger crystals can be made.
Now you might say this could also be Co(SCN)x. True, they have a similar color. But we made the Thiocyanatocobaltate(II) about 2-3 years ago and since then left it on the shelf and it never precipitated. While here we have a much lower conc. of Co(II). Hg(SCN)2, on the other hand, is not colored because Hg(II) is a d10-system. Mercury Chemistry: Co[Hg(SCN)4]](https://i.ytimg.com/vi/jUqjZziourY/mqdefault.jpg)
 [I3](-) forms. Thallium Chemistry: Thaliium(I)-Triiodide](https://i.ytimg.com/vi/jw5S6mtx338/mqdefault.jpg)
![Mercury Chemistry: Hg3[AsO3]2 and Hg3[AsO4]2
In this video, we make and compare a Mercury(II)-Arsenite and -Arsenate by mixing HgCl2 with NaAsO2 and NaHAsO4. Now usually we do not make every possible compound just to increase the number of videos but for this, we wanted to test something. The Arsenate is, according to literature yellow, while the Arsenite is colorless, but develops a yellow color which is believed to be due to oxidation. We wanted to test this and made both solutions.
At first, you cannot see any precipitate (right jar = Arsenate) but after a while, and a second addition of more Arsenate you can see a yellow turbid color. For the Arsenite, it happens much fast but the solution turns yellow as well, much as expected. If you compare the two after a while you can see that they have the same type of yellow in their solution. 24h later the Arsenate had precipitated as yellow compound while the Arsenite formed a colorless one.
This proves, that the compounds differ in color and only a small fraction, the parts in solution are yellow, probably due to oxygen in the water and the stirring process and that it probably is some oxidation of the Arsenite.
We also tested both up to 350°C for thermochromism but nothing happened. Mercury Chemistry: Hg3[AsO3]2 and Hg3[AsO4]2](https://i.ytimg.com/vi/kCN6V7e5-Eo/mqdefault.jpg)

 and [CoCl4](2-) you probably thought this could be possible with similar compounds as well.
So what we did here was to mix CuCl2 with H2O and HCl to a ratio where the nearly colorless, blue [Cu(H2O)6](2+) is turned into the green [CuCl4](2-) when it is heated. Copper Chemistry: Copper Thermochromism](https://i.ytimg.com/vi/l6AYp2X_iq4/mqdefault.jpg)