Uploaded September 2016 | Updated November 2026, 4 hours ago
In this video we use some of the Cadmium Sulfide we prepared in the last video and roast it with a burner. As SO2 is produced the brown Cadmium Oxide forms.
In this video we use some of the Cadmium Sulfide we prepared in the last video and roast it with a burner. As SO2 is produced the brown Cadmium Oxide forms.

![Tellurium Chemistry: Two flame colors of Tellurium [hard to see]
If Te compounds are burned the flame color is said to be a mix of green and blue and if the right temperatures are chosen a green flame can be seen in the colder part of the burner while a blue flame shows in the hot parts. It seems to be due to an oxidation taking place. Not only is the Te ionized when heated in a hot flame but also oxidized by the air at the elevated temperature. The green flame is supposed to be the oxidation to Te(IV) while the blue flame is the oxidation to Te(VI).
There is another element in the PSE that changes color depending on the temperature of the flame and that is Thulium...which we unfortunately dont have at the moment. But we will order some, soon and try that.
What you can see here is us holding a bit of Te at the very end of the flame of a burner then moving it closer to the core of the flame. At first the flame really seems to be slightly greenish. The cam doesnt pick it up well but it was way greener than the core flame which is blue. Maybe someone can try this with a better cam again.
Also if you find more information on this reaction we would be happy to get some additional information on this as it was hard to find anything on this phenomenon. Tellurium Chemistry: Two flame colors of Tellurium [hard to see]](https://i.ytimg.com/vi/axVQjKBFsbs/mqdefault.jpg)


![Arsenic Chemistry: As2Hg3 or Fleitmanns test
This is an interesting test for Arsenic(III). Many people try to find Arsenic the classic way by burning AsH3. I had to do this test in my Analytical Course at the university and the stuff blew up twice shooting glass shards, As-compounds and a lot of other stuff into my face. So we try to show different methods here.
Here, we prepared a mixture of Sodium Arsenite and Potassium Hydroxide and added some water. To this some small Aluminium flakes were added and the mixture heated. On the top of the test tube (make sure it is clean and doesnt have any Arsenic on it) we stuck a wet piece of paper which was soaked in HgCl2 first to the glass wall. After some time it turns brown.
So what is happening?
KOH and Al react to K[Al(OH)4] producing a lot of nascent Hydrogen. The Hydrogen reacts with the As(III) reducing it to As(-III) to form the compound AsH3. So the bigger brother of NH3 (Ammonia) and PH3 (Phosphine).
Now for Marshs test you do pretty much the same until now, but with Acid instead of Base. And yes you can run this experiment in acid as well, which is then called Gutzeits test.
Now usually you would burn the AsH3 to form H2O and As which can be depleted onto a piece of ceramics and further tested. We go a different approach here and mix it with HgCl2 on the paper. First AsH2HgCl forms, then two of these react with an additional HgCl2 to form AsH(HgCl)2 which reacts with an additional AsH2HgCl to finally form As2Hg3.
While this forms, the color changes due to the different species being present in between from yellow to brown.
Now it is hard to find anything on this compound, some call it Arsenic(II)mercurate(-II) (which is probably better called Mercuride....) , others call it Mercury(II)Arsenide(-III) and some say it is an amalgamate. Comparing the different electronegativities you see that an Arsenide seems better especially as there is no further redox reaction involved in the process as As is already As(-III) the only side products to all these recombinations is HCl. So, we suggest Mercury(II)-Arsenide(-III) seems most plausible.
Now you can also use Silver for this test as Silvernitrate. What will happen is:
AsH3 and 6 AgNO3 react to form [Ag3As x 3 AgNO3] which is yellow, but reacts with the water present to form brown-black elemental Silver and H3AsO3 as well as HNO3, which is produced in each step. Arsenic Chemistry: As2Hg3 or Fleitmanns test](https://i.ytimg.com/vi/bZ4WtMu87jM/mqdefault.jpg)


 complex. Neither were we able to make it from a mixed oxide, from the Dioxide nor through other routes.
One suggestion was to react Potassium Bromate, Mn(II) and H2SO4 which is what we did here. It produces a lot of Bromnie vapour. The Aluminium plates are still covered with rests of Iodides which is why the surface immediatly turns dark when the Bromine forms.
After we added some water it looked dark red for a second before turning orange. Warm temperatures and dilution are said to cause the formation of Mn(IV) and this is probably the product at the end of the video but inbetween, although the cam didnt fully pick it up, we are sure to have seen a red hue.
I guess this is up to you. Perhaps you know a better way. We only wanted to talk a bit about Mn(III) now:
So Mn(III) isnt very stable and will undergo fast disproportionation to Mn(II) and Mn(IV). The reaction is accelerated by water, so dilution, because it can act on the water as oxidizing agent, so one might construct 2 redox reactions:
2 Mn(III) + 6 H2O to Mn(II) + MnO2 + 4 H3O(+)
and
2 Mn(III) + 3 H2O to 2 Mn(II) + 2 H3O(+) + 0.5 O2
According to the principle of Le Chatelier and the fact that we use an excess of oxidizer (Bromate/H2SO4) it becomes clear why the Mn(III) is stable until we add water.
As said depending on the situation one might observe different colors. If together with Phosphates or Borates Mn(III) turns purple, which is what you do if you test samples with Borax for example. The hexaqua complex is deep red. This is due to a d4 configuration im comparison to the Mn(II) d5. So the transition is not spin forbidden anymore and it becomes all colorful.
Whenever we talk about d4 configuations in octahedra we also have to remember the famous Jahn-Teller effect. Usually people always think about Copper and d9 systems when they talk about Jahn-Teller distortions but d4 has the same effect which might add a bit to the intensity of the compound.
Usually all octahedral Mn(III) complexes are in a high-spin configuration. There is one famous exception and we already showed you this, the yellow [Mn(CN)6](3-). Using ligands like these it is possible to stabilize the Mn(III) quite long. Since we published the video we kept that yellow sample in a vial where the lid usually is not as airtight so it had plenty of oxygen to react with but still does not show any formation of MnO2 or any color change at all.
There are other ligands like EDTA which also stabilize the oxidation state quite well. Manganese Chemistry: Mn(III) ?](https://i.ytimg.com/vi/eGIT4ZbGTOA/mqdefault.jpg)
 complex.
This experiment shows how the Ag - I bond is way stronger than the Ag - Cl bond. Again HSAB concept can be applied.
Silver is positively charged but quite big. Therefore it is considered to be a soft acid. A soft acid and soft base form a strong bond. For Chloride and Iodide, the Iodide is bigger with the same charge so softer than the Chloride, making a Ag - I bond more stabile than a Ag - Cl bond. This is why Ammonia cant substitute it. Silver Chemistry: Silveriodide and Ammonia (?)](https://i.ytimg.com/vi/ehzyvmf-Jwg/mqdefault.jpg)

![Thermochromism: Silver(I)Iodide
We already showed you how HgI2 is thermochromic. But HgI2 is nothing you may be able to obtain, so we show you an interesting alternative, this time using AgI, which can be easily prepared from any soluble silver salt and an Iodide.
That AgI is thermochromic, too is something you rarely hear about, but as you can see it can be reversibly heated, much like HgI2, and also the mechanism somehow reminds us of how the Iodomercurates behaved.
AgI forms a Wurtzite lattice. M2[HgI4] had a zinc-blende lattice. The two are basically the same, the Wurzite is just the hexagonal form of the cubic zinc-blende, which means, that it has a different stacking. Again only 50% of the tetrahedral sites are occupied by Ag(+). Once the temperature is raised the Ag(+) becomes more and agile and occupies different sites, which causes a red-shift in the Ligand-to-Metal Charge-Transfer. In this process, the conductivity also increases.
Now we will not further focus on that here, Silver is something special when its about moving Ag(+)-Ions in lattices. So called Frenkel defects in Silver compounds often contribute to a high conductivity once silver salts are used. The reason why Silver is so mobile here is that Silver can come quite close to itself. This is called Argentophilia, Silver likes itself so much, that short Ag-Ag distances are no problem, so once you give the silver the possibility to move it will occupy new sites, which also shifts the color.
What we show here is only using about 250°C. We also tried heating it with a bunsen burner and at some point it would even turn dark red. Thermochromism: Silver(I)Iodide](https://i.ytimg.com/vi/hbXQSdtNJ_0/mqdefault.jpg)