Uploaded January 2018 | Updated November 2026, 9 hours ago
At the beginning you can see the HgO (red) we made by the decomposition of Hg(NO3)2. As we hold it directly into the flame of a bunsen burner it turns dark and then disappears.
Decomposing HgO is a very famous way to make Oxygen in the lab. You can weigh out the salt and therefore precisely know the amount of oxygen produced. Sometimes this process is therefore called 'to weigh out oxygen', too.
There are so many videos that show how the oxygen then bubbles through water but we found this was unnecessary to show here.
At the beginning you can see the HgO (red) we made by the decomposition of Hg(NO3)2. As we hold it directly into the flame of a bunsen burner it turns dark and then disappears.
Decomposing HgO is a very famous way to make Oxygen in the lab. You can weigh out the salt and therefore precisely know the amount of oxygen produced. Sometimes this process is therefore called 'to weigh out oxygen', too.
There are so many videos that show how the oxygen then bubbles through water but we found this was unnecessary to show here.





![Thermochromism: Tl2[HgI4]
This is the last video where we explore the different Tetraiodomerucrates. The explanation is probably the same as for Cu and Ag here, although it is really hard to see the result. According to literature, it is supposed to turn red in the process of heating it.
It is a bit hard to see but in the beginning the compound was dark yellow and in the end it was red. Thermochromism: Tl2[HgI4]](https://i.ytimg.com/vi/aJfFY2iIgxU/mqdefault.jpg)


![Tellurium Chemistry: Two flame colors of Tellurium [hard to see]
If Te compounds are burned the flame color is said to be a mix of green and blue and if the right temperatures are chosen a green flame can be seen in the colder part of the burner while a blue flame shows in the hot parts. It seems to be due to an oxidation taking place. Not only is the Te ionized when heated in a hot flame but also oxidized by the air at the elevated temperature. The green flame is supposed to be the oxidation to Te(IV) while the blue flame is the oxidation to Te(VI).
There is another element in the PSE that changes color depending on the temperature of the flame and that is Thulium...which we unfortunately dont have at the moment. But we will order some, soon and try that.
What you can see here is us holding a bit of Te at the very end of the flame of a burner then moving it closer to the core of the flame. At first the flame really seems to be slightly greenish. The cam doesnt pick it up well but it was way greener than the core flame which is blue. Maybe someone can try this with a better cam again.
Also if you find more information on this reaction we would be happy to get some additional information on this as it was hard to find anything on this phenomenon. Tellurium Chemistry: Two flame colors of Tellurium [hard to see]](https://i.ytimg.com/vi/axVQjKBFsbs/mqdefault.jpg)

