Sinker Cypress Night Moon @emberwoodandcrafts-thomastritt

Uploaded August 2025 | Updated September 2026, 9 hours ago

Sinker Cypress cookie slab with rotted out core and branch inset into to missing heart that looked like a crows skull. Flattened to 5-1/2 inches thick to level out the surfaces. Soda blasted entire piece to clean off everything loose. Used Designer Epoxy Deep Pour with Mother of Pearl mica to fill in and stabilize the base. Used the clear epoxy afterwards on the top, bottom, and side and also to help stabilize the rotted out sections.

Sanded top and bottom to 600 grit and side to 240 grit. Finished with Ack’s abrasive paste and carnauba wax.

Longest diameter was 17-1/2 inches.

$Found on Ground Red Oak Live-edge Bowl F.O.G Red Oak (Pin Oak likely) Live-edge Bowl. First live-edge. Had to fill in worm screw hole on the bottom after uncovering the red sparring and wanting to keep it. Heat fractures checking showed up while working - filled with Starbond CA glue. Filled Worm Screw hole with turned off cut of another wood. Sanded to 600 grit outside. Finished with blue dyed ‘shine juice’. Cleaned up with Ack’s abrasive paste and Carnuba Polishing Paste. Final dimensions - 3-3/4 inches tall (at tallest) and 7-3/4 outside diameter.$

Box Fan Filter Box for Shop and Home Use

Penn State Industries Icon Pen Kit, Gold, with Bubinga

$Turned Rosewood Pill Box Small rosewood bowl blank, cut in half to expose more ‘decorative’ features. Heat fractures showed up along grain lines while coring - filled with black Starbond CA glue. Sanded to 600 grit outside and 320 grit inside and base. Finished with red dyed ‘shine juice’. Cleaned up with Ack’s abrasive paste and Carnuba Polishing Paste. Final dimensions - 5-5/32 inches tall, 2-5/32 outside diameter, 1-5/8 inches inside diameter.$

Honeycomb Masonic Gavel, with London Pattern Handle, and Block

Sweetgum - Punky, Spalted, and Grub Ridden - Part III - Turning Final