Uploaded September 2023 | Updated November 2026, 3 hours ago
I've seen other videos showing horns and buzzers but they don't sound close enough to any actual horn to work. I also realized using a bike horn at over 100db would probably be a bad idea. A simple 555 circuit seems the smallest/easiest way to go about it without getting into more modulation to improve the sound of it. I think with the proper speaker enclosure or amplifier guide it can not only be louder but sound more horn-like.
This circuit produces square waves around 320hz to 380hz. I also found 400-450hz or so at around 15% duty to sound pretty good. 6v paired with this small speaker seems to work pretty good but it might sound better at 12v using a more powerful speaker that can handle it better.
Use this circuit combined with the Aux On/Off circuit like this ( amazon.com/Remote-Controlled-Electronic-Switch-Relay/dp/B08FLZXSD7/ref=sr_1_5?crid=TK3H2OTXKFXO&keywords=rc+aux+on+off&qid=1695783349&sprefix=rc+aux+on+off%2Caps%2C202&sr=8-5 )
and set the desired channel to a momentary on function. The output voltage from the receiver will directly power the horn circuit.
I've seen other videos showing horns and buzzers but they don't sound close enough to any actual horn to work. I also realized using a bike horn at over 100db would probably be a bad idea. A simple 555 circuit seems the smallest/easiest way to go about it without getting into more modulation to improve the sound of it. I think with the proper speaker enclosure or amplifier guide it can not only be louder but sound more horn-like.
This circuit produces square waves around 320hz to 380hz. I also found 400-450hz or so at around 15% duty to sound pretty good. 6v paired with this small speaker seems to work pretty good but it might sound better at 12v using a more powerful speaker that can handle it better.
Use this circuit combined with the Aux On/Off circuit like this ( amazon.com/Remote-Controlled-Electronic-Switch-Relay/dp/B08FLZXSD7/ref=sr_1_5?crid=TK3H2OTXKFXO&keywords=rc+aux+on+off&qid=1695783349&sprefix=rc+aux+on+off%2Caps%2C202&sr=8-5 )
and set the desired channel to a momentary on function. The output voltage from the receiver will directly power the horn circuit.










