Shoot-Through Could Kill This Entire Device | 1 Min PCB Design Review @AltiumAcademy
Shoot-Through Could Kill This Entire Device | 1 Min PCB Design Review  @AltiumAcademy
Uploaded July 2026 | Updated November 2026, 2 days ago
Altium Develop unites your schematic capture, sourcing, and manufacturing in one cloud workspace so shoot-through risks and EMI problems get caught long before your portable instrument ships to fab: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=one-minute-pcb-design-reviews&utm_content=shoot-through-could-kill-this-entire-device

In this One Minute PCB Design Review, Tech Consultant Zach Peterson examines the schematics for a portable PCR instrument and immediately flags a serious shoot-through risk in the power stage. Because the Intersil gate drivers don't apply any dead time, Zach walks through two practical fixes engineers can use right away: adjusting the gate resistor value to speed up the FET turn-off time, or adding a Miller clamp circuit to hold the gate low.

Zach then turns to signal integrity and EMI, where he identifies a common mode choke whose WΓΌrth datasheet shows only 90 ohms of impedance at 100 MHzβ€”far too little for reliable USB filtering. He recommends swapping it for a common mode EMI filter specifically rated for USB data lines, noting that a quick search on Octopart surfaces dozens of parts with true low-pass behavior built for the job.

πŸ”Ή Connect with Zach: Want your design reviewed by Zach? Reach out to him on LinkedIn with your design and production files for a chance to be featured on our channel: linkedin.com/in/zachariah-peterson

πŸ’‘ Stay Connected:

Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!

πŸ‘‰ Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1

Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.

πŸ‘‰ Follow Altium on TikTok: tiktok.com/@altiumdesigner

πŸ‘‰ Follow Altium on Twitter: twitter.com/altium

πŸ‘‰ Follow Altium on Linkedin: linkedin.com/company/altium

πŸ‘‰ Follow Altium on Facebook: facebook.com/AltiumOfficial

The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!

About Altium LLC

Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.


#Altium #PCBDesign #GateDrivers
Shoot-Through Could Kill This Entire Device | 1 Min PCB Design ReviewAltium Training - Draftsman: Updating an Existing Draftsman DocumentAltium Is Coming Home to the Designer | Lawrence Romine on OnTrackAltium Training - Schematic Capture: Placing Components from the WorkspaceAltium Training - PCB Routing: Power PlanesSplit Grounds? Add a Net Tie | 1 Min PCB Design ReviewPCB Assembly Mistakes Designers Keep Making: PCB West 2026 PreviewHDI PCB Stackup Breakdown - Etching Weight Via Spacing, & MoreAltium Training - PCB Introduction: Properties PanelEMC Testing in the Age of AI: Why Respins Arent Going AwayPCB Design Standards: Why IPC Rules Matter to Your ManufacturerIs FPGA the Best Engineering Career? With Adam Taylor
Altium Academy |

Shoot-Through Could Kill This Entire Device | 1 Min PCB Design Review

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER