Uploaded February 2014 | Updated September 2026, 13 hours ago
2020 UPDATE #3
Questions? bd@berniedawg.com
Do not use round-lobed security bits. The rounded lobes can easily slip out of the penta when the penta-screw is held very tightly and will damage the penta-screw beyond repair and with no ability to extract it. This caution applies to bits sold by a vendor that goes by the name Quie*Sto*e (Q*ietS*ove). Those tools from that vendor WILL destroy your caps! DO NOT USE THESE BITS!
You can get cap washers and SRV pips in the USA at reasonable prices from eBay vendor "spinnakerspar" as of this time (2020).
If you need a Penta-Wrench, it is an easy matter to use a hand-file to file the end of an Allen (hex) wrench to fit the penta with sharp and appropriate edges.
There is at least one vendor in Asia who is also making the penta-tool. Check eBay for "simonchantwus_gmail", or check my parts supplier list at: berniedawg.com/stove-part-supplier-links for a direct link to their products. They also have newly-made Taiwanese SRV fuel caps in three different flavors.
BD Penta-Wrench Production Update
I am no longer selling the wrench seen in the video. Sorry, folks.
Parts for caps and other stove supplies:
berniedawg.com/stove-part-supplier-links
More questions? bd@berniedawg.com
DISCLAIMER
Any repair work you do on your stove is solely your responsibility. I have no way to judge whether you are familiar enough with simple tools to do this repair. I have no way to insure that you will follow my instruction properly. You take all risks when you decide to attempt to do the work. If, after viewing the video, you don't feel like you are competent to do the work, you are probably right. I cannot be held liable for any damage or injury you may cause. Have an experienced technician perform the work for you instead. I can do these repairs for you for reasonable dough ($5 USD) and shipping. bd@berniedawg.com
2020 UPDATE #3
Questions? bd@berniedawg.com
Do not use round-lobed security bits. The rounded lobes can easily slip out of the penta when the penta-screw is held very tightly and will damage the penta-screw beyond repair and with no ability to extract it. This caution applies to bits sold by a vendor that goes by the name Quie*Sto*e (Q*ietS*ove). Those tools from that vendor WILL destroy your caps! DO NOT USE THESE BITS!
You can get cap washers and SRV pips in the USA at reasonable prices from eBay vendor "spinnakerspar" as of this time (2020).
If you need a Penta-Wrench, it is an easy matter to use a hand-file to file the end of an Allen (hex) wrench to fit the penta with sharp and appropriate edges.
There is at least one vendor in Asia who is also making the penta-tool. Check eBay for "simonchantwus_gmail", or check my parts supplier list at: berniedawg.com/stove-part-supplier-links for a direct link to their products. They also have newly-made Taiwanese SRV fuel caps in three different flavors.
BD Penta-Wrench Production Update
I am no longer selling the wrench seen in the video. Sorry, folks.
Parts for caps and other stove supplies:
berniedawg.com/stove-part-supplier-links
More questions? bd@berniedawg.com
DISCLAIMER
Any repair work you do on your stove is solely your responsibility. I have no way to judge whether you are familiar enough with simple tools to do this repair. I have no way to insure that you will follow my instruction properly. You take all risks when you decide to attempt to do the work. If, after viewing the video, you don't feel like you are competent to do the work, you are probably right. I cannot be held liable for any damage or injury you may cause. Have an experienced technician perform the work for you instead. I can do these repairs for you for reasonable dough ($5 USD) and shipping. bd@berniedawg.com
