Uploaded October 2026 | Updated November 2026, 2 days ago
I pulled out my Realistic STA-120B receiver for its yearly workout. This was made by Hitachi for Radio Shack in 1972.
Somewhat high hour unit - most of the bulbs were burned out when purchased around 4 years ago and it always struggled to produce solid wattage. Fidelity struggled but overall was acceptable when coupled with some EQ. Furthermore, I could just tell by looking at some of the capacitors in the power supply and how the wrappers had shrunk from heat and usage.
These days, I’m going through and performing recaps on many of my vintage receivers. It can be a hot topic depending which vintage receiver group you’re in or who you talk to, but I am officially declaring tonight that recapping is a true benefit and should be performed to all of these vintage units.
Some people will say that full recaps change the sound profile and personality but when you have something that’s 50 years old how do you even know what it originally sounded like?
I replaced the capacitors in the tone circuit, preamp boards, phono board, amplifier driver circuit, and in the power supply. I did leave the larger two filter capacitors - I have yet to find a pair of these which are out of spec to the point to where they would cause an impact, but who knows maybe I’m wrong.
I did not touch the tuner, it’s something maybe I’ll get to later.
I did not change any transistors, I did not detect any static or noise at all, which would be related to any of those going bad.
After changing ~30 caps, this thing is sounding better than ever. Smooth sounding, warm, and powerful. And the dial lights dim just a little now with the volume turned up, where before it was a significant light show.
Upon testing a sample of the old capacitors, they were all 25 to 50% over spec. And ESR was higher.
Have a happy and safe Halloween everyone!
I pulled out my Realistic STA-120B receiver for its yearly workout. This was made by Hitachi for Radio Shack in 1972.
Somewhat high hour unit - most of the bulbs were burned out when purchased around 4 years ago and it always struggled to produce solid wattage. Fidelity struggled but overall was acceptable when coupled with some EQ. Furthermore, I could just tell by looking at some of the capacitors in the power supply and how the wrappers had shrunk from heat and usage.
These days, I’m going through and performing recaps on many of my vintage receivers. It can be a hot topic depending which vintage receiver group you’re in or who you talk to, but I am officially declaring tonight that recapping is a true benefit and should be performed to all of these vintage units.
Some people will say that full recaps change the sound profile and personality but when you have something that’s 50 years old how do you even know what it originally sounded like?
I replaced the capacitors in the tone circuit, preamp boards, phono board, amplifier driver circuit, and in the power supply. I did leave the larger two filter capacitors - I have yet to find a pair of these which are out of spec to the point to where they would cause an impact, but who knows maybe I’m wrong.
I did not touch the tuner, it’s something maybe I’ll get to later.
I did not change any transistors, I did not detect any static or noise at all, which would be related to any of those going bad.
After changing ~30 caps, this thing is sounding better than ever. Smooth sounding, warm, and powerful. And the dial lights dim just a little now with the volume turned up, where before it was a significant light show.
Upon testing a sample of the old capacitors, they were all 25 to 50% over spec. And ESR was higher.
Have a happy and safe Halloween everyone!










