Powerboat Testing @rmackay9

Powerboat Testing @rmackay9

Uploaded April 2018 | Updated September 2026, 1 week ago

First test of a Powerboat using ArduPilot Rover-3.3 firmware.
Flight controller is an mRobotics Pixracer with 900mHz telemetry radio and uBlox 8 GPS. Frame is a HobbyKing HydroTek provided courtesy of Holybro.

Powerboat Testing

ArduCopter 3.1 Crash Checker

BalloonFinder Test #2

Object Avoidance using simple Lidar (Forward and Upwards)

Rover QuikTune Introduction

CubePilot UAV CAN GPS firmware upgrade process

Balloon Finder Test4

Sparkfun AVC 2014 - Japan Drones onboard flight

Loiter Turns In Simulator

AC3.2 EKF Check in Simulator

OpenKai + ArduPilot + TX1 + ZED Visual Odometry (Non-GPS Navigation)

Lightware SF45/B and Simple Avoidance on Copter-4.1.0-dev

Powerboat Testing