Uploaded December 2023 | Updated September 2026, 1 week ago
*3D Print a double curved 'shim' to prefectly fit a helmet camera.*
I've used this method on 4 different helmets now. If you have access to a 3D printer it works well.
All files are free to download here: thingiverse.com/thing:6030568 (you'll need to set up a free account).
The (free) 'OpenSCAD' CAD program is available here: openscad.org
*NOTE: SOME HELMETS CAN BE WEAKENED BY ADHESIVES.* Check that your helmet is compatible before applying any stickers, or adhesive pads.
2:16 Measuring the curvature
4:21 OpenSCAD generates the curved shim
5:18 3D printer
5:28 Fitting the camera mount with 3M VHB Tape
*3D Print a double curved 'shim' to prefectly fit a helmet camera.*
I've used this method on 4 different helmets now. If you have access to a 3D printer it works well.
All files are free to download here: thingiverse.com/thing:6030568 (you'll need to set up a free account).
The (free) 'OpenSCAD' CAD program is available here: openscad.org
*NOTE: SOME HELMETS CAN BE WEAKENED BY ADHESIVES.* Check that your helmet is compatible before applying any stickers, or adhesive pads.
2:16 Measuring the curvature
4:21 OpenSCAD generates the curved shim
5:18 3D printer
5:28 Fitting the camera mount with 3M VHB Tape
