Uploaded September 2024 | Updated September 2026, 7 hours ago
Pecan bowl with natural sides left. After cleaning out the grub holes, infilled with epoxy resin; however, it had gone bad and had to remove a significant amount and let it set for a lot longer. Ended up with some ‘scarring’ in the resin that was unable to remove without altering the bowl more.
Sanded to 400 grit. Finished with Waterlox Satin and cleaned up with Ack’s abrasive paste and some automotive compound and polish for the exterior resin.
Final dimensions - 4 inches tall and 6-5/8 inches outside diameter.
Pecan bowl with natural sides left. After cleaning out the grub holes, infilled with epoxy resin; however, it had gone bad and had to remove a significant amount and let it set for a lot longer. Ended up with some ‘scarring’ in the resin that was unable to remove without altering the bowl more.
Sanded to 400 grit. Finished with Waterlox Satin and cleaned up with Ack’s abrasive paste and some automotive compound and polish for the exterior resin.
Final dimensions - 4 inches tall and 6-5/8 inches outside diameter.
