LEGO Electrostatic Escapement with Direct-Drive Pendulum @AmiVarsano
LEGO Electrostatic Escapement with Direct-Drive Pendulum  @AmiVarsano
Uploaded December 2013 | Updated November 2026, 6 hours ago
A LEGO clock escapement with a physical pendulum directly driven by an electrostatic motor.

The rotor and pendulum are mounted on a shared brass axle, swinging in unison. The pendulum governs the oscillation period, while the axle rests freely on a plastic bearing.

The motor uses a six-pole electrostatic induction system with brass-ball electrodes spaced at a 17 kV potential difference. The rotor consists of six aluminum balls mounted on a LEGO Technic water wheel.

A loosely resting towball bob engages the escape wheel, advancing it by one tooth just before the pendulum reaches its rightward peak.

Watch how electrostatic forces drive clock escapement systems:
youtube.com/playlist?list=PLCbYhDNjOviFDr28b6FfLKd3jKW7fMr8j

#legoescapement #legoclockescapement #ElectrostaticMotor #legoclockmechanism #simpleharmonicmotion
LEGO Electrostatic Escapement with Direct-Drive PendulumLEGO Clock Escapement with Electrostatic Rebound DriveFlying Pendulum with Parts from the Local Hardware StoreWave Pendulum CollectionElectrostatic Coupled Oscillators with Door ChimesLego Clock Escapement - GalileosDouble Pendulum Chaotic AcrobaticsElectrostatic Repulsion Powers LEGO Pendulum OscillatorLego Escapement V1 with Magnetically Actuated Balance WheelLEGO Pendulum Escapement with Gravitational Yo-yo CouplingLEGO Verge Escapements: Foliot vs. PendulumElectrostatic Drive Powers LEGO Clock Escapement
Ami Varsano |

LEGO Electrostatic Escapement with Direct-Drive Pendulum

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER