Uploaded November 2022 | Updated September 2026, 1 week ago

---

This escapement was designed to separate the pendulum motion from the going train, allowing for more accuracy and reliability.

The STL File: jbvcreative.com/products/the-arnfield-gravity-escapement

Prints on all standard 3d printers without supports, requires the following additional parts to assemble:

- 5 M4x12 Screws (I used amzn.to/3Cf7dpp)
- 10 M4 Washers (These are the ones amzn.to/3E1crFU)
- 5 624Z 13mm OD/4mm ID Bearings (These work great amzn.to/3rdtj58)
- 1mm Nylon String or Fishing Line (I used string from this set amzn.to/3dOHT00)

Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Total Print Time: ~25 hours
Total Filament: ~140g
Minimum Build Plate Required: 180x180mm

Please note that these files are for personal enjoyment only. If you do wish to sell PRINTED versions of this model, you can do so with a JBV Creative Small Business License: patreon.com/jbvcreative

**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

Discord Channel:
I Created a discord channel to talk about all things escapements and 3D Printed clock. You can join here: discord.gg/BdTnvfpjHD