Uploaded November 2022 | Updated September 2026, 1 week ago
The Verge Escapement is one of the earliest escapement mechanisms ever invented. Instead of a hanging side-to-side pendulum, it uses an oscillating inertial weight. The pendulum period can be adjusted by increasing the inertia of the pendulum. This is achieved by adding mass to to the ends of the pendulum arms.
The STL File: jbvcreative.com/products/the-verge-escapement
Prints on all standard 3d printers without supports, requires the following additional parts to assemble:
- 2 M4x12 Screw (I used amzn.to/3Cf7dpp)
- 2M4 Washers (These are the ones amzn.to/3Sh129Z)
- 2 624Z 13mm OD/4mm ID Bearings (These work great amzn.to/3rdtj58)
- 1mm Nylon String or Fishing Line (I used string from this set amzn.to/3dOHT00)
Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Total Print Time: ~13.5 hours
Total Filament Required: ~135g
Minimum Build Plate Required: 180x180mm
Please note that these files are for personal enjoyment only. If you do wish to sell PRINTED versions of this model, you can do so with a JBV Creative Small Business License patreon.com/jbvcreative
**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!
Discord Channel:
I Created a discord channel to talk about all things Escapement and 3D Printed clock. You can join with discord.gg/BdTnvfpjHD
The Verge Escapement is one of the earliest escapement mechanisms ever invented. Instead of a hanging side-to-side pendulum, it uses an oscillating inertial weight. The pendulum period can be adjusted by increasing the inertia of the pendulum. This is achieved by adding mass to to the ends of the pendulum arms.
The STL File: jbvcreative.com/products/the-verge-escapement
Prints on all standard 3d printers without supports, requires the following additional parts to assemble:
- 2 M4x12 Screw (I used amzn.to/3Cf7dpp)
- 2M4 Washers (These are the ones amzn.to/3Sh129Z)
- 2 624Z 13mm OD/4mm ID Bearings (These work great amzn.to/3rdtj58)
- 1mm Nylon String or Fishing Line (I used string from this set amzn.to/3dOHT00)
Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Total Print Time: ~13.5 hours
Total Filament Required: ~135g
Minimum Build Plate Required: 180x180mm
Please note that these files are for personal enjoyment only. If you do wish to sell PRINTED versions of this model, you can do so with a JBV Creative Small Business License patreon.com/jbvcreative
**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!
Discord Channel:
I Created a discord channel to talk about all things Escapement and 3D Printed clock. You can join with discord.gg/BdTnvfpjHD
