Uploaded February 2018 | Updated November 2026, 12 hours ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! Avoid “Z-Clipping”!
“Z-clipping” can occur when clips are positioned close to one another.
The mistake happens when a climber has clipped into a quickdraw, and while reaching down to grab the rope for their next clip, they mistakenly grab the belay side of the rope already clipped and clip that into the next clip. This forms a “Z” with the rope (see demonstration in video above). Suddenly the lead climber is unable to progress because the rope has the climber snared between the two quickdraws.
If this happens, un-clip the climbers side of the rope from the first clip, and re-clip it with the belayer’s side of the rope (see demonstration in video above).
Two ways to avoid “z-clipping”:
1. When clipping, always grab the rope from the knot at your waist (where you are tied in).
2. Have an active belayer who notices the mistake and can call it out to the climber.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! Avoid “Z-Clipping”!
“Z-clipping” can occur when clips are positioned close to one another.
The mistake happens when a climber has clipped into a quickdraw, and while reaching down to grab the rope for their next clip, they mistakenly grab the belay side of the rope already clipped and clip that into the next clip. This forms a “Z” with the rope (see demonstration in video above). Suddenly the lead climber is unable to progress because the rope has the climber snared between the two quickdraws.
If this happens, un-clip the climbers side of the rope from the first clip, and re-clip it with the belayer’s side of the rope (see demonstration in video above).
Two ways to avoid “z-clipping”:
1. When clipping, always grab the rope from the knot at your waist (where you are tied in).
2. Have an active belayer who notices the mistake and can call it out to the climber.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!









![Alpine & Mountaineering: 8. Changing Directions in Snow | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! Let’s look at how to change directions when climbing steep snow slopes. When switchbacking up a steep snow slope, you will obviously have to change directions—multiple times!
Here are the steps for changing direction, while maintaining a self belay with the ice axe for security:
Step 1: Take an “out of balance” cross over step (legs crossed).
Step 2: Move your other foot up and into the same plane, so you’re standing in the “duck walk” position with both hands on your ice axe in a “self belay.” See the video for demonstrations, and for more on walking techniques, see our video on “Snow Travel - Duck Foot”[hyperlink to video].
Step 3: Change hands on your ice axe so that when you change directions your axe is still in the uphill hand. Spin the head of the ice axe so you have the same grip as before the turn (this will likely be the “self arrest” grip with pick backwards, but some may prefer a pick-forward grip).
Step 4: Move your foot into an “in balance” foot position (legs uncrossed, uphill foot forward), and continue to walk or climb in the new direction of travel.
We hope you found this video helpful.
Please remember, climbing and mountaineering are inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Alpine & Mountaineering: 8. Changing Directions in Snow | Climbing Tech Tips](https://i.ytimg.com/vi/X_FgwLin678/mqdefault.jpg)
