Uploaded February 2018 | Updated November 2026, 12 hours ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! An “edge” typically describes a rock feature, with a flat surface.
Edges vary in length. Longer edges are called “rails”, while shorter ones are proper edges.
Edges also vary in width. Smaller edges are known as “crimps” or “crimpers”. These can be as thin as a dime edge. Large ones are referred to as “jugs”. If jugs are large enough to stand on while hands free, then they are called “ledges”.
Edges can be in any orientation. As such when climbing on edges it is important to know how to place your feet, in order to make best use of that Edge. For more on this, see our video on ‘Edging’.
When a climber learns to position the body relative to the orientation of the edge, even the smallest edges offer a world of possibility for movement.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! An “edge” typically describes a rock feature, with a flat surface.
Edges vary in length. Longer edges are called “rails”, while shorter ones are proper edges.
Edges also vary in width. Smaller edges are known as “crimps” or “crimpers”. These can be as thin as a dime edge. Large ones are referred to as “jugs”. If jugs are large enough to stand on while hands free, then they are called “ledges”.
Edges can be in any orientation. As such when climbing on edges it is important to know how to place your feet, in order to make best use of that Edge. For more on this, see our video on ‘Edging’.
When a climber learns to position the body relative to the orientation of the edge, even the smallest edges offer a world of possibility for movement.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!







![Alpine & Mountaineering: 8. Changing Directions in Snow | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! Let’s look at how to change directions when climbing steep snow slopes. When switchbacking up a steep snow slope, you will obviously have to change directions—multiple times!
Here are the steps for changing direction, while maintaining a self belay with the ice axe for security:
Step 1: Take an “out of balance” cross over step (legs crossed).
Step 2: Move your other foot up and into the same plane, so you’re standing in the “duck walk” position with both hands on your ice axe in a “self belay.” See the video for demonstrations, and for more on walking techniques, see our video on “Snow Travel - Duck Foot”[hyperlink to video].
Step 3: Change hands on your ice axe so that when you change directions your axe is still in the uphill hand. Spin the head of the ice axe so you have the same grip as before the turn (this will likely be the “self arrest” grip with pick backwards, but some may prefer a pick-forward grip).
Step 4: Move your foot into an “in balance” foot position (legs uncrossed, uphill foot forward), and continue to walk or climb in the new direction of travel.
We hope you found this video helpful.
Please remember, climbing and mountaineering are inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Alpine & Mountaineering: 8. Changing Directions in Snow | Climbing Tech Tips](https://i.ytimg.com/vi/X_FgwLin678/mqdefault.jpg)


