Uploaded February 2018 | Updated November 2026, 12 hours ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! Now we are just about ready to launch onto our climb for the day. Here are a few more thoughts:
1. Bring comfortable shoes for long day on the rock. A good pair of high-performance, comfortable shoes are worth the investment!
2. Below are a few racking considerations for racking climbing gear:
If using a gear sling:
- Clip quickdraws and/or alpine draws onto front gear loops of harness
- Clip cams onto the gear sling, organized small to large
If using gear loops on harness, here are some ideas:
- Clip an even amount of cams onto both front gear loops of harness, organized small to large, nuts and large cams can go on back gear loops
- Clip quickdraws and/or alpine draws onto the back gear loops
- Organize gear by priority (i.e. the piece you’ll need at the crux) or initial pieces needed
Alternatively, some climbers like to carry alpine draws extended and slung over their shoulder, with cams and stoppers on their harness. The only problem with this method is that your alpine quickdraws are already extended, so if you don’t want to extend your cam or stopper quite that far (imagine you’re protecting a potential fall onto a ledge), you’ll have to rethread the carabiners and assemble the shortened quickdraw while climbing. We think it is much easier to extend the alpine quickdraw out from the shortened version, not vice versa.
3. Clip cordelettes onto the harnesses of both the lead climber and belayer if swinging leads.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! Now we are just about ready to launch onto our climb for the day. Here are a few more thoughts:
1. Bring comfortable shoes for long day on the rock. A good pair of high-performance, comfortable shoes are worth the investment!
2. Below are a few racking considerations for racking climbing gear:
If using a gear sling:
- Clip quickdraws and/or alpine draws onto front gear loops of harness
- Clip cams onto the gear sling, organized small to large
If using gear loops on harness, here are some ideas:
- Clip an even amount of cams onto both front gear loops of harness, organized small to large, nuts and large cams can go on back gear loops
- Clip quickdraws and/or alpine draws onto the back gear loops
- Organize gear by priority (i.e. the piece you’ll need at the crux) or initial pieces needed
Alternatively, some climbers like to carry alpine draws extended and slung over their shoulder, with cams and stoppers on their harness. The only problem with this method is that your alpine quickdraws are already extended, so if you don’t want to extend your cam or stopper quite that far (imagine you’re protecting a potential fall onto a ledge), you’ll have to rethread the carabiners and assemble the shortened quickdraw while climbing. We think it is much easier to extend the alpine quickdraw out from the shortened version, not vice versa.
3. Clip cordelettes onto the harnesses of both the lead climber and belayer if swinging leads.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!







![Bouldering: 10. Resting Between Attempts | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! Boulder problems are relatively short, but they are intense, with powerful moves. They require a lot of energy per attempt.
Resting between attempts when bouldering is important, in order to prevent overuse injury. If you keep firing to the same crimp, and almost hitting the move, your tendons will grow fatigued.
A boulder problem might take only a minute to climb, but require 10 minutes of rest between attempts.
Savor the rests, have fun, spot your friends, learn from watching others and rest well. This allows you to gradually build endurance, minimize injury, and attain your goals.
See our videos on Sequences [hyperlink] and Planning [hyperlink] for additional considerations.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Bouldering: 10. Resting Between Attempts | Climbing Tech Tips](https://i.ytimg.com/vi/_bPvhz-qcXQ/mqdefault.jpg)


