Uploaded February 2018 | Updated November 2026, 12 hours ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we review partner inspections, which occurs after the climber has tied into the rope and the belayer has clipped the rope into the belay device.
The belayer will check the climber to make sure that:
1. Harness is properly above the waist
2. Harness is two fingers tight
3. Harness is properly double backed
4. Rope is properly through the 2 hardpoints
5. There are 5 sets of two’s in the figure-eight knot, and at least 2 fists of tail.
Next the climber will check the belayer to make sure that:
1. Harness is properly above the waist
2. Harness is two fingers tight
3. Harness is properly double backed
4. Carabiner is properly through the belay loop and locked
5. Rope is through the belay device and the carabiner, and device is oriented properly.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we review partner inspections, which occurs after the climber has tied into the rope and the belayer has clipped the rope into the belay device.
The belayer will check the climber to make sure that:
1. Harness is properly above the waist
2. Harness is two fingers tight
3. Harness is properly double backed
4. Rope is properly through the 2 hardpoints
5. There are 5 sets of two’s in the figure-eight knot, and at least 2 fists of tail.
Next the climber will check the belayer to make sure that:
1. Harness is properly above the waist
2. Harness is two fingers tight
3. Harness is properly double backed
4. Carabiner is properly through the belay loop and locked
5. Rope is through the belay device and the carabiner, and device is oriented properly.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!


![Bouldering: 10. Resting Between Attempts | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! Boulder problems are relatively short, but they are intense, with powerful moves. They require a lot of energy per attempt.
Resting between attempts when bouldering is important, in order to prevent overuse injury. If you keep firing to the same crimp, and almost hitting the move, your tendons will grow fatigued.
A boulder problem might take only a minute to climb, but require 10 minutes of rest between attempts.
Savor the rests, have fun, spot your friends, learn from watching others and rest well. This allows you to gradually build endurance, minimize injury, and attain your goals.
See our videos on Sequences [hyperlink] and Planning [hyperlink] for additional considerations.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Bouldering: 10. Resting Between Attempts | Climbing Tech Tips](https://i.ytimg.com/vi/_bPvhz-qcXQ/mqdefault.jpg)







