Traditional Climbing: 6. Cam Placement and Retrieval | Climbing Tech Tips @ClimbingTechTips
Traditional Climbing: 6. Cam Placement and Retrieval | Climbing Tech Tips  @ClimbingTechTips
Uploaded February 2018 | Updated November 2026, 12 hours ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we look at how to place and remove cams.

The most important tip for retrieving a cam is also the simplest: first, try to visualize exactly how the cam was placed, then just reverse that motion to get it back out again.

For example, if the cam is placed in a narrow constricted section of a crack that widens slightly above that point, then it’s likely the lead climber had initially inserted the cam in the wider section, and pulled it down into the constricted section (note that cams are best when placed in pods, not in gradually tapering cracks—this might be more suitable for a nut or hex).

When removing a cam, squeeze the cam trigger gently to release it from its set position in the crack. Move the cam to the wider section, wherever that may be. Often, you will be able to pull a cam straight out, but sometimes you will need higher powers of visualization (or tips from the leader) to get the cam out.


Tip - When retrieving a cam, pull the trigger just enough to wiggle the cam free. If you pull the trigger all the way—so the cam is fully cammed—and then accidentally move it into a tighter space, the cam can get really, really stuck.


We hope you found this video helpful.

Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Traditional Climbing: 6. Cam Placement and Retrieval | Climbing Tech TipsAid Climbing & Big Walls: 15. How to Pendulum & Lower Out While Cleaning | Climbing Tech TipsGym Top Rope Climbing: 1. Gear Considerations | Climbing Tech TipsTraditional Climbing: 14. Alternative Trad Anchor - Consideration #1 | Climbing Tech TipsBasic & Intermediate Outdoor Climbing: 7. Top Rope Anchor - Using a Cordelette | Climbing Tech TipsAlpine & Mountaineering: 17. Selecting Alpine Boots | Climbing Tech TipsAlpine & Mountaineering: 8. Changing Directions in Snow | Climbing Tech TipsAid Climbing & Big Walls: 2. Additional Aid Gear | Climbing Tech TipsMulti-Pitch Trad: 9. Racking Part 2 of 2 | Climbing Tech TipsMulti-Pitch Trad: 14. Finding the Route and Descent | Climbing Tech TipsIce Climbing: 11. Falling Considerations | Climbing Tech TipsAlpine & Mountaineering: 15. Snow Anchors - Using your Ice Axe | Climbing Tech Tips
Climbing Tech Tips |

Traditional Climbing: 6. Cam Placement and Retrieval | Climbing Tech Tips

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER