Uploaded July 2018 | Updated September 2026, 2 weeks ago
In this video I test to see if a gasometer is at risk of explosion without flame arresters on the gas lines. Air intrusion in a low pressure storage tank is always a risk, so this question is an important one. Though my conclusion in the video is that wood gas is not combustible below a 50/50 ratio with air, flame arresters are still a good precaution to take. If air is injected into the storage tank and ignited quickly enough (prior to evenly distributing) there could be a flammable pocket of gas at the correct ratios to cause ignition, in which case the top of the gasometer could be blown off and expose the rest of the gas to air. This is an unlikely, but possible scenario that a flame arrester would help prevent.
If you missed my previous videos in this wood gas/bio-fuel series check them out here:
Building a better gassifier: youtu.be/HQIW4dVVokE
Building a gasometer for wood gas storage: youtu.be/5hfznunVzKY
Thanks to all my Patrons for helping me make these videos! A special thanks to my top Patrons: Syniurge, Matthew Leitzke, TheBackyardScientist, Enzo Breda Lee, John Johnson, & Thibaud Peverelli! patreon.com/NightHawkProjects
In this video I test to see if a gasometer is at risk of explosion without flame arresters on the gas lines. Air intrusion in a low pressure storage tank is always a risk, so this question is an important one. Though my conclusion in the video is that wood gas is not combustible below a 50/50 ratio with air, flame arresters are still a good precaution to take. If air is injected into the storage tank and ignited quickly enough (prior to evenly distributing) there could be a flammable pocket of gas at the correct ratios to cause ignition, in which case the top of the gasometer could be blown off and expose the rest of the gas to air. This is an unlikely, but possible scenario that a flame arrester would help prevent.
If you missed my previous videos in this wood gas/bio-fuel series check them out here:
Building a better gassifier: youtu.be/HQIW4dVVokE
Building a gasometer for wood gas storage: youtu.be/5hfznunVzKY
Thanks to all my Patrons for helping me make these videos! A special thanks to my top Patrons: Syniurge, Matthew Leitzke, TheBackyardScientist, Enzo Breda Lee, John Johnson, & Thibaud Peverelli! patreon.com/NightHawkProjects



![DIY Hydrophobic Coating [Never Wet, Ultra Ever Dry Replacement]
DIY Hydrophobic Coating [Never Wet, Ultra Ever Dry Replacement] DIY Hydrophobic Coating [Never Wet, Ultra Ever Dry Replacement]](https://i.ytimg.com/vi/OzN8uI5USXM/mqdefault.jpg)



![Experiments For Isolating Alkali Metals | Sodium & Potassium - [Part 1] - NightHawkInLight
In this video I revisit an old project: producing alkali metals in my workshop. Ive been working on this series of experiments for a number of weeks. I have not yet had complete success as you will see, but Ive made quite a lot of progress. The dialogue for this video was unscripted so forgive my rambling. Let me know if you like this style as Im still trying to decide how Id like to edit my next video in the series.
#NightHawkInLight
-~-~~-~~~-~~-~-
Check out my latest video: How To View Invisible Air Currents With Lasers
https://www.youtube.com/watch?v=K94Cc21KEIA
-~-~~-~~~-~~-~- Experiments For Isolating Alkali Metals | Sodium & Potassium - [Part 1] - NightHawkInLight](https://i.ytimg.com/vi/RJ21jQiOv2E/mqdefault.jpg)


