Uploaded November 2026 | Updated November 2026, 1 day ago
One stand that fits any laptop, because the dimensions are driven by parameters instead of fixed numbers.
This builds a laser cut laptop stand from scratch in Fusion. Material thickness, stand width and angle are all set up as User Parameters, so fitting a different laptop or switching from 3mm to 6mm ply is one number, not a rebuild.
Along the way: creating and organising components, sketch constraints, and Extrude, Mirror and Combine to put it together. Plus using the timeline to go back and change things without starting over.
That’s the whole point of parametric modelling. Build it once, adjust it forever.
🚀 Join over 1.2 million professionals that use Autodesk Fusion to supercharge their design-to-manufacturing workflows.
► FREE TRIAL | https://autode.sk/3Wtfi20
► SUBSCRIBE | https://autode.sk/30njGGX
► GET STARTED | https://autode.sk/30k2DWh
► TRY AN EXTENSION | https://autode.sk/3EOUidW
💬 Ask the Autodesk Community for help with parametric modelling, laser cutting, 3D modelling, manufacturing, drawings, or anything else in Autodesk Fusion.
► FUSION FORUMS | https://autode.sk/47NiKsJ
► ASK THE COMMUNITY | https://autode.sk/3SYjMhv
📣 CONNECT with Fusion on social media:
► INSTAGRAM | https://autode.sk/2Enzh8P
► X | https://autode.sk/45cIYTK
► LINKEDIN | https://autode.sk/3UyieZS
📚 Learn more about EduCAD, our Autodesk Learning Partner:
edu-cad.com
Autodesk
#MakeAnything
CHAPTERS
00:00 Introduction – Designing a Laser Cut Laptop Stand
00:27 Creating a New Design in Fusion
00:57 Creating the First Component and Sketch
02:56 Setting Up User Parameters with Autodesk Assistant
04:15 Extruding the Sketch and Adding Fillets
05:32 Copying Components and Creating Joints
06:39 Testing and Updating Design Parameters
07:20 Applying Appearances
07:58 Creating the Top Component
09:43 Creating Tabs with Sketch Mirror
11:28 Extruding the Top and Cutting Slots with Combine
13:14 Testing the Parametric Design
13:58 Creating Support Components
16:47 Mirroring Components Using Construction Planes
17:48 Updating Features Using the Timeline
18:49 Creating Slots for the Supports
20:27 Adding As-Built Joints
21:36 Next Steps – Preparing for Laser Cutting
21:54 Thanks for Watching!
One stand that fits any laptop, because the dimensions are driven by parameters instead of fixed numbers.
This builds a laser cut laptop stand from scratch in Fusion. Material thickness, stand width and angle are all set up as User Parameters, so fitting a different laptop or switching from 3mm to 6mm ply is one number, not a rebuild.
Along the way: creating and organising components, sketch constraints, and Extrude, Mirror and Combine to put it together. Plus using the timeline to go back and change things without starting over.
That’s the whole point of parametric modelling. Build it once, adjust it forever.
🚀 Join over 1.2 million professionals that use Autodesk Fusion to supercharge their design-to-manufacturing workflows.
► FREE TRIAL | https://autode.sk/3Wtfi20
► SUBSCRIBE | https://autode.sk/30njGGX
► GET STARTED | https://autode.sk/30k2DWh
► TRY AN EXTENSION | https://autode.sk/3EOUidW
💬 Ask the Autodesk Community for help with parametric modelling, laser cutting, 3D modelling, manufacturing, drawings, or anything else in Autodesk Fusion.
► FUSION FORUMS | https://autode.sk/47NiKsJ
► ASK THE COMMUNITY | https://autode.sk/3SYjMhv
📣 CONNECT with Fusion on social media:
► INSTAGRAM | https://autode.sk/2Enzh8P
► X | https://autode.sk/45cIYTK
► LINKEDIN | https://autode.sk/3UyieZS
📚 Learn more about EduCAD, our Autodesk Learning Partner:
edu-cad.com
Autodesk
#MakeAnything
CHAPTERS
00:00 Introduction – Designing a Laser Cut Laptop Stand
00:27 Creating a New Design in Fusion
00:57 Creating the First Component and Sketch
02:56 Setting Up User Parameters with Autodesk Assistant
04:15 Extruding the Sketch and Adding Fillets
05:32 Copying Components and Creating Joints
06:39 Testing and Updating Design Parameters
07:20 Applying Appearances
07:58 Creating the Top Component
09:43 Creating Tabs with Sketch Mirror
11:28 Extruding the Top and Cutting Slots with Combine
13:14 Testing the Parametric Design
13:58 Creating Support Components
16:47 Mirroring Components Using Construction Planes
17:48 Updating Features Using the Timeline
18:49 Creating Slots for the Supports
20:27 Adding As-Built Joints
21:36 Next Steps – Preparing for Laser Cutting
21:54 Thanks for Watching!










