Uploaded September 2026 | Updated November 2026, 2 days ago
Every magnetic phone dock has the same problem. The magnet is stronger than the dock, so when you grab your phone the dock comes with it. Even a $118 one.
Most people fix this by hiding weight inside the print, using clay or metal beads. Scott Yu-Jan went the other way and made the weight the whole design. Two 1-2-3 machinist blocks, solid steel, about $15 a pair at any hardware store, sitting right out in the open as the base.
This one is the modeling. Scott builds the dock from scratch in Fusion, and along the way covers sketching and constraints, why you want a fully defined sketch before you model anything, which view to start from, cutting the cavities for the blocks, and how to go back through the timeline and fix a mistake without starting over. By the end you've got an STL and a dock that won't budge when you pull your phone off.
Don't print it yet though. There are still a few things wrong with it. Parts 3 and 4 sort those out and add AirPods and Apple Watch charging.
Watch Part 1 on Scott's channel, where he sets up a free personal use license and covers the basics:
youtu.be/PoU8Mb-WCzA
0:00 The problem with every iPhone dock
1:40 Why 1-2-3 blocks
2:40 Sketching over photos
3:31 Setting up Fusion
5:09 Start with what you know
9:44 Extruding, and picking the right view
14:02 Building the dock body
15:52 Cutting the block cavities
17:55 The MagSafe pocket and cable channel
20:51 Fixing a mistake with the timeline
22:13 Does it actually work?
►FREE TRIAL | https://autode.sk/3Wtfi20
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P
TWITTER | https://autode.sk/45cIYTK
LINKEDIN | https://autode.sk/3UyieZS
FACEBOOK | https://autode.sk/3WaaZLb
Every magnetic phone dock has the same problem. The magnet is stronger than the dock, so when you grab your phone the dock comes with it. Even a $118 one.
Most people fix this by hiding weight inside the print, using clay or metal beads. Scott Yu-Jan went the other way and made the weight the whole design. Two 1-2-3 machinist blocks, solid steel, about $15 a pair at any hardware store, sitting right out in the open as the base.
This one is the modeling. Scott builds the dock from scratch in Fusion, and along the way covers sketching and constraints, why you want a fully defined sketch before you model anything, which view to start from, cutting the cavities for the blocks, and how to go back through the timeline and fix a mistake without starting over. By the end you've got an STL and a dock that won't budge when you pull your phone off.
Don't print it yet though. There are still a few things wrong with it. Parts 3 and 4 sort those out and add AirPods and Apple Watch charging.
Watch Part 1 on Scott's channel, where he sets up a free personal use license and covers the basics:
youtu.be/PoU8Mb-WCzA
0:00 The problem with every iPhone dock
1:40 Why 1-2-3 blocks
2:40 Sketching over photos
3:31 Setting up Fusion
5:09 Start with what you know
9:44 Extruding, and picking the right view
14:02 Building the dock body
15:52 Cutting the block cavities
17:55 The MagSafe pocket and cable channel
20:51 Fixing a mistake with the timeline
22:13 Does it actually work?
►FREE TRIAL | https://autode.sk/3Wtfi20
►SUBSCRIBE | https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P
TWITTER | https://autode.sk/45cIYTK
LINKEDIN | https://autode.sk/3UyieZS
FACEBOOK | https://autode.sk/3WaaZLb










