Uploaded August 2018 | Updated September 2026, 2 weeks ago
daisy.com/product/metal-lever-for-the-daisy-red-ryder
daisy.com/product/fiber-optic-front-sight-red-ryder-buck
OEM fiber sight returned such fast results because many Ryders come from the factory with loose front sight. They are slapped on. I went from 3 inch group to 1 1/2 because my new fiber unit fit very tightly. I couldn't get it off to demo install for this video - and I wasn't willing to damage it. Know that once it is on, it stays on.
Factory Front sight removal: youtu.be/46OHgUrKv00
Ballistol on trigger/piston sear last piece of puzzle. Please know I did not mean to sound, well, mean-spirited on these videos. I just want shooters to enjoy their Ryder. These guns have rough, mass-produced trigger units that are prone to jam... when new. One of these videos is designed to be as EASY as possible to lube trigger. You will also will be rewarded with greater accuracy
! youtu.be/Z4VV6Y6k5DI
youtu.be/x6uWfXUZrkk
PARTS FROM DAISY:
137969-000 Front Sight - Fiber Optic $1
169862-100 Lever- Metal $4
Total: $5.00
Call before 5pm Arkansas time, weekdays. Ask for parts PDF for Red Ryder too.
479-636-1200
daisy.com/contact-us
NOTE: For trigger lube, make sure gun is uncocked before stock and trigger removal.
This 6-in-1 screw driver works on all Daisy rifles. And for your 105 or Red Ryder the nut driver tool takes off nuts just fine. Just be careful on lever nut - it can wear on paint. Slightly pull back on nut to break contact with paint.
oreillyauto.com/detail/b/performance-tool-4601/tools---equipment-16488/tools-23747/hand-tools-16814/screwdrivers-16627/screwdriver-18038/dfd67728e60c/performance-tool-screwdriver/20152/4613246
Here is ultimate tool for any Daisy:
oreillyauto.com/detail/b/ultrasteel-5143/tools---equipment-16488/hand-tools-16814/screwdrivers-16627/screwdriver-set-18039/f5abc6f97d6b/ultrasteel-screwdriver/ts93300a/4772726
OPERATION NOTE: When you buy UltraSteel kit ($22) make sure not to pry open case. It has a "T" lock in front of red button. After pulling up on T, use small Swiss Army blade to cut T on the neck until it snaps off, then push other half down hole. Then slide red button forward to unlock!
Helpful fix for speedloading Ryder and 25, but fast forward to end for Ryder loading:
youtu.be/2bv3rWV6hWQ
daisy.com/product/metal-lever-for-the-daisy-red-ryder
daisy.com/product/fiber-optic-front-sight-red-ryder-buck
OEM fiber sight returned such fast results because many Ryders come from the factory with loose front sight. They are slapped on. I went from 3 inch group to 1 1/2 because my new fiber unit fit very tightly. I couldn't get it off to demo install for this video - and I wasn't willing to damage it. Know that once it is on, it stays on.
Factory Front sight removal: youtu.be/46OHgUrKv00
Ballistol on trigger/piston sear last piece of puzzle. Please know I did not mean to sound, well, mean-spirited on these videos. I just want shooters to enjoy their Ryder. These guns have rough, mass-produced trigger units that are prone to jam... when new. One of these videos is designed to be as EASY as possible to lube trigger. You will also will be rewarded with greater accuracy
! youtu.be/Z4VV6Y6k5DI
youtu.be/x6uWfXUZrkk
PARTS FROM DAISY:
137969-000 Front Sight - Fiber Optic $1
169862-100 Lever- Metal $4
Total: $5.00
Call before 5pm Arkansas time, weekdays. Ask for parts PDF for Red Ryder too.
479-636-1200
daisy.com/contact-us
NOTE: For trigger lube, make sure gun is uncocked before stock and trigger removal.
This 6-in-1 screw driver works on all Daisy rifles. And for your 105 or Red Ryder the nut driver tool takes off nuts just fine. Just be careful on lever nut - it can wear on paint. Slightly pull back on nut to break contact with paint.
oreillyauto.com/detail/b/performance-tool-4601/tools---equipment-16488/tools-23747/hand-tools-16814/screwdrivers-16627/screwdriver-18038/dfd67728e60c/performance-tool-screwdriver/20152/4613246
Here is ultimate tool for any Daisy:
oreillyauto.com/detail/b/ultrasteel-5143/tools---equipment-16488/hand-tools-16814/screwdrivers-16627/screwdriver-set-18039/f5abc6f97d6b/ultrasteel-screwdriver/ts93300a/4772726
OPERATION NOTE: When you buy UltraSteel kit ($22) make sure not to pry open case. It has a "T" lock in front of red button. After pulling up on T, use small Swiss Army blade to cut T on the neck until it snaps off, then push other half down hole. Then slide red button forward to unlock!
Helpful fix for speedloading Ryder and 25, but fast forward to end for Ryder loading:
youtu.be/2bv3rWV6hWQ
