Uploaded August 2018 | Updated September 2026, 6 days ago
Have an iRig2 and still want your high-quality audio from your mixer to your phone and back? Just use an adapter, it still works! Here's how to set it up. Gear setup kit.co/rayortega/mix-minus-to-smartphone
Music by PremiumBeat.com.
License this music: bit.ly/1BJbspm
Track: Blue Notes by Mattijs Muller
Track: Easy Roller by Chill Study
If you want to bring audio like phone calls from your phone (iPhone or Android) and then send your good microphones and/or additional audio back to the caller, you can use an iRIG2 for a high-quality connection with complete control over your audio.
To do this setup, you need to create a mix-minus. Here's how to do that youtube.com/watch?v=au47Ferbxfc
This will allow you to send all the audio connected to your audio mixer to your smartphone so that the caller can hear your good microphones and any additional audio clips you want to play for them. If you did this without a mix-minus, you would also be sending their own audio back into the phone, creating an annoying loop of their own voice. The mix-minus prevents this issue because you can control which audio gets sent to the phone and which audio does not.
When connecting a mixer to a smartphone, you need some level of attenuation of the signal because you are sending line-level (very loud) audio into an input (the microphone input of the phone) that is looking for a low level sound. The iRIG2 will provide the necessary attenuation for connecting the two pieces of gear.
SUBSCRIBE youtube.com/thepodcasterssstudio
INSTAGRAM: instagram.com/podcasthelper
TWITTER: twitter.com/podcasthelper
**CABLES I used with the iRig2**
► From mixer aux send to iRig2 podhelp.me/1-4TRSto1-4TRS3ft-zon
► From iRig2 headphone output to audio channel on your mixer podhelp.me/hosaYcable3ftzon
🎥 🖥 📱🎤 GEAR USED TO MAKE THIS VIDEO 🤘
► iRig2: podhelp.me/iRig2Zon
► 2nd Gen of my mixer: amzn.to/2KrGZ4S
► LENS: Sigma 16mm F1.4: podhelp.me/SigmaE16mmBH
► Sony a6500: podhelp.me/a6500kit1BH
► DR-10L Lav mic/recorder: podhelp.me/TascamDR10LBH
► Rode VideoMic Pro podhelp.me/RodeVMP-R_BH
► Manfrotto PIXI Mini Tripod amzn.to/2ytmUu1
► Transcend 65GB SDXC card for 4K podhelp.me/Trans64U3zon
► Adobe Creative Cloud podhelp.me/CC1yearBHdownload
► iPhone App for Sound Board: backpackstudioapp.com
*all links should be considered affiliate links. I encourage you to shop around for the best prices at the time you are viewing this. You can read my ethics statement via thepodcastersstudio.com/ethics. Thanks!
#podcasting #audioproduction #sigma16mm #a6500
Have an iRig2 and still want your high-quality audio from your mixer to your phone and back? Just use an adapter, it still works! Here's how to set it up. Gear setup kit.co/rayortega/mix-minus-to-smartphone
Music by PremiumBeat.com.
License this music: bit.ly/1BJbspm
Track: Blue Notes by Mattijs Muller
Track: Easy Roller by Chill Study
If you want to bring audio like phone calls from your phone (iPhone or Android) and then send your good microphones and/or additional audio back to the caller, you can use an iRIG2 for a high-quality connection with complete control over your audio.
To do this setup, you need to create a mix-minus. Here's how to do that youtube.com/watch?v=au47Ferbxfc
This will allow you to send all the audio connected to your audio mixer to your smartphone so that the caller can hear your good microphones and any additional audio clips you want to play for them. If you did this without a mix-minus, you would also be sending their own audio back into the phone, creating an annoying loop of their own voice. The mix-minus prevents this issue because you can control which audio gets sent to the phone and which audio does not.
When connecting a mixer to a smartphone, you need some level of attenuation of the signal because you are sending line-level (very loud) audio into an input (the microphone input of the phone) that is looking for a low level sound. The iRIG2 will provide the necessary attenuation for connecting the two pieces of gear.
SUBSCRIBE youtube.com/thepodcasterssstudio
INSTAGRAM: instagram.com/podcasthelper
TWITTER: twitter.com/podcasthelper
**CABLES I used with the iRig2**
► From mixer aux send to iRig2 podhelp.me/1-4TRSto1-4TRS3ft-zon
► From iRig2 headphone output to audio channel on your mixer podhelp.me/hosaYcable3ftzon
🎥 🖥 📱🎤 GEAR USED TO MAKE THIS VIDEO 🤘
► iRig2: podhelp.me/iRig2Zon
► 2nd Gen of my mixer: amzn.to/2KrGZ4S
► LENS: Sigma 16mm F1.4: podhelp.me/SigmaE16mmBH
► Sony a6500: podhelp.me/a6500kit1BH
► DR-10L Lav mic/recorder: podhelp.me/TascamDR10LBH
► Rode VideoMic Pro podhelp.me/RodeVMP-R_BH
► Manfrotto PIXI Mini Tripod amzn.to/2ytmUu1
► Transcend 65GB SDXC card for 4K podhelp.me/Trans64U3zon
► Adobe Creative Cloud podhelp.me/CC1yearBHdownload
► iPhone App for Sound Board: backpackstudioapp.com
*all links should be considered affiliate links. I encourage you to shop around for the best prices at the time you are viewing this. You can read my ethics statement via thepodcastersstudio.com/ethics. Thanks!
#podcasting #audioproduction #sigma16mm #a6500
