Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???) @colorfulchemistry2569
Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)  @colorfulchemistry2569
Uploaded September 2016 | Updated November 2026, 3 days ago
We had several ideas to make blue Cr(II) from Cr(III). One was to reduce it using nascent Hydrogen again. So we added some HCl to a CrCl3 solution and with the help of some aluminum and 2h of reaction time we got a gray solution which did not form the expected red compound with Sodium Acetate.

Now after some literature research we found out that Cr(II) can react with acids as well forming Cr(III) again and even if we had succeeded in making the red Cr(II)-Acetate, it would dissolve in HCl.

As we didn't know this fact when we were still in the lab we decided to use the strongest reducing agent we had, elemental Lithium. So instead of Aluminum foil we would wrap a small sheet of Lithium foil around the end of pipette and dip it into the CrCl3 solution. As LiOH formed, Cr(OH)3 precipitated. So we acidified the solution again and ended up with the problem as mentioned above as acid was now present. In all of these cases we reached a gray-greenish solution which did not form any red compound with Acetate.

So we looked even further into literature and found out that Lithium Aluminum Hydride reacts with Cr(III) as well. We tried it but the reaction was too vigorous and only reacted on the water surface so we changed it for Sodium Borohydride.
---------------------------------------------------------------------------------------------------------

So this is a week green solution of Cr(III) which is hopefully reduced by Sodium Borohydride to form the blue Cr(II). In the end we added this to Acetate and it would not react. Now it is said that these Cr(II) compounds are extremely oxophilic. Even small amounts of Oxygen can be enough to cover the red color of the acetate which might be a reason why we don't see it. Even though the Hydrogen pressure is quite high still enough oxygen might be present in the NaOAc solution to discolor the product.

As the color changed quite noticeably from green to a dark blue we assume at least some Cr(II) had formed.

There is also a way to make this compound from Cr(VI) and we will try this as well maybe it works better that way. Problem is that Chromium tends to do Hydrate-Isomerisms, it changes the Ligands, Counter-Ions and solvent molecules after some time or if the temperature is varied ( we will show this effect for Cr(III)Sulfate soon. So of course introducing some new compounds into the solution can also lead to different products, Cr(III) with Sulfate is blueish, Cr(III) with Chloride is green and if the aqua complex forms it becomes purple. So this might be an explanation for the blue color here as well.

Now space is a little limited here so we will explain the importance of the Acetate compound we were trying to make from Cr(II) Chloride in another video. If you have any suggestions on how we could isolate Cr(II) better let us know!
Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)Arsenic Chemistry: Distilling elemental ArsenicPalladium Chemistry: Palladium NitrateMercury Chemistry: Hg2[CrO4] disproportionation in KCNThermochromism: Thallium(I)DichromateNickel Chemistry: [NiCl4](2-)Thallium Chemistry: Thallium reduction by NaBH4Phosphorus Chemistry: Oxidation and AcidMercury Chemistry: HgO (red) from HgCO3 x HgOHalogen Chemistry: IodocyaneRuthenium Chemistry: RuO4 + NaBH4 (RuO2) (?)Palladium Chemistry: Thiourea complex
Colorful Chemistry |

Chromium Chemistry: [6x faster] Cr(II) using NaBH4 (???)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER