Uploaded October 2016 | Updated November 2026, 3 days ago
We already talked about the reaction which is occurring as Phosphorus combusts. In some way red Phosphorus is a polymeric chain of white Phosphorus tetrahedra. As the bonds are broken (due to heat) smaller fragments form. White Phosphorus is pyrophoric as the P-P-bonds are not really suitable for an Tetrahedron. Oxygen can insert into these bonds which happens so fast and with so much energy that it catches fire as the Oxide is being produced.
Now P4O10 is a good fuming agent as you see a tiny amount of red P produces a lot of thick white smoke. We collected the smoke here and added a small amount of water. A pH indicator showed an acidic condition.
And this is an important rule for the Chemistry of Element Oxides.
- Hydrolyzed Nonmetal oxides form Acids
- "-" metal oxides form Bases
CaO will form Ca(OH)2 in water which is a base while SO2 will form H2SO3 and SO3 will form H2SO4
But why is that the case ?
Ok so how do they differ. Metal Oxides are salts, the have Ionic compositions whereas Nonmetal Oxides have covalent bonds and are molecules. Nonmetal Oxides are Anyhdrides. This is what some may remember from school:
If you take H2SO4 for example and subtract one H2O you will end up with SO3, so SO3 is the anhydride of Sulfuric Acid. If dropped back into water it will form the Acid again. Okay so this explains why those anhydrides (Cl2O7 = HClO4 / P4O10 = H3PO4 / SO2 = H2SO3, ....) will form acids if dropped into water.
What some don't see is that this rule applies for basic Oxides as well. Take Mg(OH)2. Now subtract one H2O you will end up with MgO. Or for Na(OH). One H2O can't be taken since there are not enough Hydrogen, so we double it to yield Na2(OH)2. Take away the H2O you end up with Na2O, this is Sodium Oxide.
So we already have a very simple explanation, the Oxides are Anhydrides of Acids and Bases.
But let's give this a further explanation:
The bigger the difference in electronegativity the more "ionic" will the Oxide "O(2-)" be. But we know that Oxide cannot exist as an Ion in water, It will automatically react with H2O to form 2 OH(-).
What about the acidic ones. One has to mention that the rule of rising acidity towards the right side of the PSE often only applies to the highest Oxidation state (NO, CO, ... have different reactions). The bond is polarized due to the electronegative Oxygen and the central Atom is often in a high oxidation state so quite positive. The negative Oxygen in water can attack this central atom. As we known from organic chemistry a X-OH2(+) is not stable as H2O is a good leaving group, so the additional H(+) will be shifted to the Oxygen which was already on the nonmetallic oxide forming an
HO-X-OH (if X-O was used). We also know that the X-O bond is quite strong and the higher the positive charge on the central atom the easier will the O-H bond break. We call this an acid H. It reacts with additional water to form XO2(2-) + 2 H3O(+).
Yes there are amphoteric oxides as well, we mentioned the amphoteric hydroxides of Aluminium and Beryllium already in another video so we won't discuss them here.
For the transition metal oxides its often hard to say. Those really vary in acidity.
We already talked about the reaction which is occurring as Phosphorus combusts. In some way red Phosphorus is a polymeric chain of white Phosphorus tetrahedra. As the bonds are broken (due to heat) smaller fragments form. White Phosphorus is pyrophoric as the P-P-bonds are not really suitable for an Tetrahedron. Oxygen can insert into these bonds which happens so fast and with so much energy that it catches fire as the Oxide is being produced.
Now P4O10 is a good fuming agent as you see a tiny amount of red P produces a lot of thick white smoke. We collected the smoke here and added a small amount of water. A pH indicator showed an acidic condition.
And this is an important rule for the Chemistry of Element Oxides.
- Hydrolyzed Nonmetal oxides form Acids
- "-" metal oxides form Bases
CaO will form Ca(OH)2 in water which is a base while SO2 will form H2SO3 and SO3 will form H2SO4
But why is that the case ?
Ok so how do they differ. Metal Oxides are salts, the have Ionic compositions whereas Nonmetal Oxides have covalent bonds and are molecules. Nonmetal Oxides are Anyhdrides. This is what some may remember from school:
If you take H2SO4 for example and subtract one H2O you will end up with SO3, so SO3 is the anhydride of Sulfuric Acid. If dropped back into water it will form the Acid again. Okay so this explains why those anhydrides (Cl2O7 = HClO4 / P4O10 = H3PO4 / SO2 = H2SO3, ....) will form acids if dropped into water.
What some don't see is that this rule applies for basic Oxides as well. Take Mg(OH)2. Now subtract one H2O you will end up with MgO. Or for Na(OH). One H2O can't be taken since there are not enough Hydrogen, so we double it to yield Na2(OH)2. Take away the H2O you end up with Na2O, this is Sodium Oxide.
So we already have a very simple explanation, the Oxides are Anhydrides of Acids and Bases.
But let's give this a further explanation:
The bigger the difference in electronegativity the more "ionic" will the Oxide "O(2-)" be. But we know that Oxide cannot exist as an Ion in water, It will automatically react with H2O to form 2 OH(-).
What about the acidic ones. One has to mention that the rule of rising acidity towards the right side of the PSE often only applies to the highest Oxidation state (NO, CO, ... have different reactions). The bond is polarized due to the electronegative Oxygen and the central Atom is often in a high oxidation state so quite positive. The negative Oxygen in water can attack this central atom. As we known from organic chemistry a X-OH2(+) is not stable as H2O is a good leaving group, so the additional H(+) will be shifted to the Oxygen which was already on the nonmetallic oxide forming an
HO-X-OH (if X-O was used). We also know that the X-O bond is quite strong and the higher the positive charge on the central atom the easier will the O-H bond break. We call this an acid H. It reacts with additional water to form XO2(2-) + 2 H3O(+).
Yes there are amphoteric oxides as well, we mentioned the amphoteric hydroxides of Aluminium and Beryllium already in another video so we won't discuss them here.
For the transition metal oxides its often hard to say. Those really vary in acidity.


 (Ru=7) and [RuO4](2-) (Ru=6) will react with Borohydrides to form a dark blue RuO2.
In the video we added Sodium Borohydride (NaBH4) to an aqueous solution of RuO4, it immediately turned dark blue-black with gas evolution.
There are two characteristic dark insoluble Ruthenium compounds, the Ru(III)oxide and Ru(IV)oxide. The latter one is blue due to impurities with Ru(III) and Ru(II) (at least this is the common explanation) so it might be a mixture of more than one oxidation state including Ru(III) and Ru(IV)…pretty much the same as the commercial chloride with a higher oxygen concentration.
As we will also try to make Ru2O3 soon we will accept this compound here to be RuO2. It will crystallize in a so called Rutile-structure, one of the more common ways MO2 compounds can crystallize. Ruthenium Chemistry: RuO4 + NaBH4 (RuO2) (?)](https://i.ytimg.com/vi/CDx7rmq49SM/mqdefault.jpg)





. If the right counter-ions are chosen it might even form a square planar geometry but CN=5 is preferred by Co(II), a [Co(CN)6](4-) hasnt been observed yet although it is mentioned in many books!
From this a dark red [Co2(CN)10](6-) Dimer forms with a Co-Co-Bond (much like in Ni(I)-Cyano-Complexes.
If this is oxidized by Oxygen a [(CN)5-Co-O-O-Co-(CN)5](6-) with a peroxo-bond inbetween the two centers. This is then further oxidized forming the yellow [Co(CN)6](3-).
Interesting enough, the [Co(CN)5](3-)-Ion can add a lot of stuff, like Oxygen, Hydrogen (forming a Hydride) and even Ethylene.
As we drop the solution into ethanol you can see that it is a yellow compound but the solution appears to be dark red. We are unsure what this dark red color is. Books mention the solution has to be boiled and more cyanide has to be added because hydrated Cyano-cobaltates(III) form as well but there is no color mentioned.
After a few hours the solution was bright yellow as seen on the end of the video. Cobalt Chemistry: Cyanocobaltates (II/III).](https://i.ytimg.com/vi/DFOOtfg0ruM/mqdefault.jpg)
![Thermochromism: Ag2[HgI4]
In this video, we heat another Tetraiodomercurate, in this case, Silver-Tetraiodomercurate.
When heated the structure changes from one, where Hg and Ag occupy tetrahedral sites of an Iodide-lattice to form a zinc-blende-type lattice, where the ions are distributed more randomly. This also reduces the band gap and causes the redshift of all the heavy metal-tetraiodomercurates.
The sudden jump from one phase to the other is due to blocking of the heavy and big Hg(II) for the Ag(I). Once a certain temperature is reached the Hg(II) moves as well and when it moves out of the Ag(I)s way it can pass and the next structure can form.
This higher agility of ions also causes the high temperatures forms to be better conductors than the room temperature ones.
For a better explanation on the lattices see our video on Cu2[HgI4]. Thermochromism: Ag2[HgI4]](https://i.ytimg.com/vi/DHyOrrUtUHY/mqdefault.jpg)
