Uploaded December 2017 | Updated November 2026, 3 days ago
The next compound we are looking at will be Thallium(I)Chromate. We didn't expect much but we have it a try anyway. For Tl2CrO4 a thermal change or two thermal changes at 350°C and something above 500°C was reported while the first one seems to be irreversible. Ours, however, is reversible and it is probably due to the fact that we are still below that temperature.
What people discovered was that in this compound you start from an orthorhombic structure. Heating it starts to increase the lattice parameters till it becomes hexagonal. Still even below this transition point of 350°C the lattice itself does expand a bit which probably causes enough distortion to already change the color slightly.
The next compound we are looking at will be Thallium(I)Chromate. We didn't expect much but we have it a try anyway. For Tl2CrO4 a thermal change or two thermal changes at 350°C and something above 500°C was reported while the first one seems to be irreversible. Ours, however, is reversible and it is probably due to the fact that we are still below that temperature.
What people discovered was that in this compound you start from an orthorhombic structure. Heating it starts to increase the lattice parameters till it becomes hexagonal. Still even below this transition point of 350°C the lattice itself does expand a bit which probably causes enough distortion to already change the color slightly.



. If the right counter-ions are chosen it might even form a square planar geometry but CN=5 is preferred by Co(II), a [Co(CN)6](4-) hasnt been observed yet although it is mentioned in many books!
From this a dark red [Co2(CN)10](6-) Dimer forms with a Co-Co-Bond (much like in Ni(I)-Cyano-Complexes.
If this is oxidized by Oxygen a [(CN)5-Co-O-O-Co-(CN)5](6-) with a peroxo-bond inbetween the two centers. This is then further oxidized forming the yellow [Co(CN)6](3-).
Interesting enough, the [Co(CN)5](3-)-Ion can add a lot of stuff, like Oxygen, Hydrogen (forming a Hydride) and even Ethylene.
As we drop the solution into ethanol you can see that it is a yellow compound but the solution appears to be dark red. We are unsure what this dark red color is. Books mention the solution has to be boiled and more cyanide has to be added because hydrated Cyano-cobaltates(III) form as well but there is no color mentioned.
After a few hours the solution was bright yellow as seen on the end of the video. Cobalt Chemistry: Cyanocobaltates (II/III).](https://i.ytimg.com/vi/DFOOtfg0ruM/mqdefault.jpg)
![Thermochromism: Ag2[HgI4]
In this video, we heat another Tetraiodomercurate, in this case, Silver-Tetraiodomercurate.
When heated the structure changes from one, where Hg and Ag occupy tetrahedral sites of an Iodide-lattice to form a zinc-blende-type lattice, where the ions are distributed more randomly. This also reduces the band gap and causes the redshift of all the heavy metal-tetraiodomercurates.
The sudden jump from one phase to the other is due to blocking of the heavy and big Hg(II) for the Ag(I). Once a certain temperature is reached the Hg(II) moves as well and when it moves out of the Ag(I)s way it can pass and the next structure can form.
This higher agility of ions also causes the high temperatures forms to be better conductors than the room temperature ones.
For a better explanation on the lattices see our video on Cu2[HgI4]. Thermochromism: Ag2[HgI4]](https://i.ytimg.com/vi/DHyOrrUtUHY/mqdefault.jpg)

 which is light blue. If a base is added not pure Cu(OH)2 forms but a hydrated form of the composition close to [Cu(H2O)4(OH)2]. As more Ammonia is added [Cu(H2O)2(NH3)4](2+) forms which is dark blue.
The reason why Copper(II) compounds tend to be more intensively colored than other transition metals is that due to the d9 situation in Cu(II) a so called Jahn-Teller effect happens (we will have a video on this soon). The Jahn-Teller distortion gives rise to different transitions. This might explain the difference to for example Nickel or Cobalt, but why is the Ammonia-complex even more colored ? Because it consists of [Cu(NH3)4](2+) which is further complexed by 2 H2O which are due to Jahn-Teller far away in the axial position. So the Cu(II) sees mostly Ammonia which is square planar around it. As you might remember from our Nickel-Cyanide video, while [Ni(H2O)6](2+) was quite weak the orange color of [Ni(CN)4](2-) which was square planar as well was really intense although the conc. of Nickel did not change.
At really high Ammonia conc. a Hexamminecopper(II) can also form. Copper Chemistry: Tetramminecoppersulfate](https://i.ytimg.com/vi/E8wx-XDwSFw/mqdefault.jpg)



 is formed in dilute, cold KOH which is further reduced to the orange [RuO4](2-) containing Ru(VI) if the conc. Is raised.
So much like with Cyanide, Ruthenium will undergo a redox reaction with the reactant before forming the new compound.
To the right glass we added some Hydrochloric acid. It quickly turned orange and over some time to a dark orange-red. This is due to two possible species that form under these conditions:
A [RuO2Cl4](2-) containing Ru(VI) and the Ru(IV) compound [Ru2OCl10](4-). The latter one contains two [RuCl5]-octahedra which are connected via an oxygen as their sixth ligand. Many other acids and compounds react in a similar way which is why all the solutions you saw (the yellow RuO4 solutions we boiled) turned dark red after a few days.
We think this last part showed that in fact we made some Ru(VIII) as in all other experiments where we used HCl (and those were a lot, although most never made it to YouTube) it would never change to this colour and only Ru(VIII) is said to behave like this.
The second thing is, usually we search for these experiments in old analytical chemistry books. But for the platinum group metals there isn’t much information. In fact, go look for some Ruthenium chemistry and see what you can find. It took us quite some amount of effort, looking at our University’s library for very old books on the subject, a special book about Ruthenium chemistry which is about 1400 pages long and many more extra books. For a long time we were unsure whether our reactant might be contaminated, which couldn’t be as we recently bought it for these experiments or the books were wrong. Which is why sometimes we had to test them out in very different ways and compare the results in the end. This however seems to be a very useful way to test for Ruthenium, to heat it in a dilute acid with some oxidizers and test the gas with dilute HCl. Be careful when doing this other compounds might not like being heated with permanganate for example. Do this if you are really sure your compound is ruthenium based! Ruthenium Chemistry: Some chemistry with RuO4](https://i.ytimg.com/vi/GN85s88if4Y/mqdefault.jpg)