Uploaded September 2016 | Updated November 2026, 18 hours ago
As Ammonia is added to Copper Sulfate first Copper(II) Hydroxide forms. Then, as more Ammonia is added it dissolves forming the dark blue Ammine-complex.
Now let's take this topic to a different view. We start of with a [Cu(H2O)6](2+) which is light blue. If a base is added not pure Cu(OH)2 forms but a hydrated form of the composition close to [Cu(H2O)4(OH)2]. As more Ammonia is added [Cu(H2O)2(NH3)4](2+) forms which is dark blue.
The reason why Copper(II) compounds tend to be more intensively colored than other transition metals is that due to the d9 situation in Cu(II) a so called Jahn-Teller effect happens (we will have a video on this soon). The Jahn-Teller distortion gives rise to different transitions. This might explain the difference to for example Nickel or Cobalt, but why is the Ammonia-complex even more colored ? Because it consists of [Cu(NH3)4](2+) which is further complexed by 2 H2O which are due to Jahn-Teller far away in the axial position. So the Cu(II) sees mostly Ammonia which is square planar around it. As you might remember from our Nickel-Cyanide video, while [Ni(H2O)6](2+) was quite weak the orange color of [Ni(CN)4](2-) which was square planar as well was really intense although the conc. of Nickel did not change.
At really high Ammonia conc. a Hexamminecopper(II) can also form.
As Ammonia is added to Copper Sulfate first Copper(II) Hydroxide forms. Then, as more Ammonia is added it dissolves forming the dark blue Ammine-complex.
Now let's take this topic to a different view. We start of with a [Cu(H2O)6](2+) which is light blue. If a base is added not pure Cu(OH)2 forms but a hydrated form of the composition close to [Cu(H2O)4(OH)2]. As more Ammonia is added [Cu(H2O)2(NH3)4](2+) forms which is dark blue.
The reason why Copper(II) compounds tend to be more intensively colored than other transition metals is that due to the d9 situation in Cu(II) a so called Jahn-Teller effect happens (we will have a video on this soon). The Jahn-Teller distortion gives rise to different transitions. This might explain the difference to for example Nickel or Cobalt, but why is the Ammonia-complex even more colored ? Because it consists of [Cu(NH3)4](2+) which is further complexed by 2 H2O which are due to Jahn-Teller far away in the axial position. So the Cu(II) sees mostly Ammonia which is square planar around it. As you might remember from our Nickel-Cyanide video, while [Ni(H2O)6](2+) was quite weak the orange color of [Ni(CN)4](2-) which was square planar as well was really intense although the conc. of Nickel did not change.
At really high Ammonia conc. a Hexamminecopper(II) can also form.



 is formed in dilute, cold KOH which is further reduced to the orange [RuO4](2-) containing Ru(VI) if the conc. Is raised.
So much like with Cyanide, Ruthenium will undergo a redox reaction with the reactant before forming the new compound.
To the right glass we added some Hydrochloric acid. It quickly turned orange and over some time to a dark orange-red. This is due to two possible species that form under these conditions:
A [RuO2Cl4](2-) containing Ru(VI) and the Ru(IV) compound [Ru2OCl10](4-). The latter one contains two [RuCl5]-octahedra which are connected via an oxygen as their sixth ligand. Many other acids and compounds react in a similar way which is why all the solutions you saw (the yellow RuO4 solutions we boiled) turned dark red after a few days.
We think this last part showed that in fact we made some Ru(VIII) as in all other experiments where we used HCl (and those were a lot, although most never made it to YouTube) it would never change to this colour and only Ru(VIII) is said to behave like this.
The second thing is, usually we search for these experiments in old analytical chemistry books. But for the platinum group metals there isn’t much information. In fact, go look for some Ruthenium chemistry and see what you can find. It took us quite some amount of effort, looking at our University’s library for very old books on the subject, a special book about Ruthenium chemistry which is about 1400 pages long and many more extra books. For a long time we were unsure whether our reactant might be contaminated, which couldn’t be as we recently bought it for these experiments or the books were wrong. Which is why sometimes we had to test them out in very different ways and compare the results in the end. This however seems to be a very useful way to test for Ruthenium, to heat it in a dilute acid with some oxidizers and test the gas with dilute HCl. Be careful when doing this other compounds might not like being heated with permanganate for example. Do this if you are really sure your compound is ruthenium based! Ruthenium Chemistry: Some chemistry with RuO4](https://i.ytimg.com/vi/GN85s88if4Y/mqdefault.jpg)




In this video we are looking back at CuCN, the compound that forms when Cu(CN)2 gets reduced by Cyanides. While being insoluble it can be brought back into solution by adding more Cyanide to it forming [Cu(CN)4](3-).
This time however we add Thiocyanate which is also a Pseudo-Halogen to it forming the soluble [Cu(CN)3(SCN)](3-).
Many Cyanides can be good precursors for other compounds and although they are strong ligands sometimes they can easily be knocked off. Copper Chemistry: [Cu(CN)3(SCN)](3-)](https://i.ytimg.com/vi/HzTh_S5lZ00/mqdefault.jpg)


![K3[V(CN)5NO] (???)
Well...to be honest we do not know what this is either!
Much like Sodium Nitroprusside other elements form Pentacyano-Nitrosyl-Metallates, too. For this often, Hydroxylamine is used together with Cyanide on the metal solution.
We found a text saying that Vanadium(V) would react with Hydroxylamine and KCN at 100°C to form an orange compound. As we only had Hydroxylamine-Hydrochloride we still gave it a chance.
Ammoniummetavanadate, KCN and Hydroxylamine-Hydrochloride were dissolved in water and boiled for some seconds. The colour changed to an orange as mentioned in the literature and a brown gas is liberated, probably Nitrous Oxides.
The problem with these type of compounds are that all of them were collected in books around the same time and have been copied since then. Today we know for example that the brown ring test contains no Iron(I) but Iron(III) and a NO(+). The same thing applies for those Pentacyanonitrosyl-Metallates. Many books automatically assume they have to be in an oxidation state +1.
This Vanadium compound was originally published to be V(-1), yes a stable -1 Metal but newer studies show it’s in fact a K3[V(CN)5(NO)]. We think many of these compounds have to be checked again, which is why we usually do not mention them. This is an exception as there is not much Vanadium chemistry you can easily do and this reaction worked so well.
We tried it again with Cyanide and Vanadate only and it would not change colours! K3[V(CN)5NO] (???)](https://i.ytimg.com/vi/IVpv_x22QAE/mqdefault.jpg)