Uploaded April 2017 | Updated November 2026, 18 hours ago
In this video we are looking back at CuCN, the compound that forms when Cu(CN)2 gets reduced by Cyanides. While being insoluble it can be brought back into solution by adding more Cyanide to it forming [Cu(CN)4](3-).
This time however we add Thiocyanate which is also a Pseudo-Halogen to it forming the soluble [Cu(CN)3(SCN)](3-).
Many Cyanides can be good precursors for other compounds and although they are strong ligands sometimes they can easily be knocked off.
In this video we are looking back at CuCN, the compound that forms when Cu(CN)2 gets reduced by Cyanides. While being insoluble it can be brought back into solution by adding more Cyanide to it forming [Cu(CN)4](3-).
This time however we add Thiocyanate which is also a Pseudo-Halogen to it forming the soluble [Cu(CN)3(SCN)](3-).
Many Cyanides can be good precursors for other compounds and although they are strong ligands sometimes they can easily be knocked off.


![K3[V(CN)5NO] (???)
Well...to be honest we do not know what this is either!
Much like Sodium Nitroprusside other elements form Pentacyano-Nitrosyl-Metallates, too. For this often, Hydroxylamine is used together with Cyanide on the metal solution.
We found a text saying that Vanadium(V) would react with Hydroxylamine and KCN at 100°C to form an orange compound. As we only had Hydroxylamine-Hydrochloride we still gave it a chance.
Ammoniummetavanadate, KCN and Hydroxylamine-Hydrochloride were dissolved in water and boiled for some seconds. The colour changed to an orange as mentioned in the literature and a brown gas is liberated, probably Nitrous Oxides.
The problem with these type of compounds are that all of them were collected in books around the same time and have been copied since then. Today we know for example that the brown ring test contains no Iron(I) but Iron(III) and a NO(+). The same thing applies for those Pentacyanonitrosyl-Metallates. Many books automatically assume they have to be in an oxidation state +1.
This Vanadium compound was originally published to be V(-1), yes a stable -1 Metal but newer studies show it’s in fact a K3[V(CN)5(NO)]. We think many of these compounds have to be checked again, which is why we usually do not mention them. This is an exception as there is not much Vanadium chemistry you can easily do and this reaction worked so well.
We tried it again with Cyanide and Vanadate only and it would not change colours! K3[V(CN)5NO] (???)](https://i.ytimg.com/vi/IVpv_x22QAE/mqdefault.jpg)

![Phosphorus Chemistry: PBr5 formation
In this video we will try to make Phosphorus Bromides. As we dont want to isolate elemental Bromine for this reaction we thought of making a tiny amount in a test tube and use the vapors in the upper half of the tube as our source of pure bromine. Therefore we added some red Phosphorus to the tip of a glass pipette and hung it in the vapors.
Part one of the video is the synthesis of Bromine. Potassium Bromide is placed in a test tube and 3% Hydrogen Peroxide is added. To this conc. Sulfuric Acid is dropped. Now many say the Acid will displace HBr which is oxidized by Peroxide but I try to stay closer to the actual redox reaction.
H2O2 + 2 H3O(+) + 2 e(-) to 4 H2O
As you can see H3O(+) or H(+) if you shorten the equation is required to compensate the extra Oxides. These redox reactions, much like the Chromate and Permanganate redox reactions depend on pH values. And a bit of acid is required to reach this high redox potential which allows Bromides to be oxidized to Bromine. Using conc. H2SO4 alone would work as well since it is quite oxidizing and does a similar effect. Here I use the conc. acid since the heat of dilution with the 97% water of the peroxide will heat the mixture up and Bromine starts to boil off.
The second part of the reaction is the Bromination:
First 2 P + 3 Br2 form 2 PBr3 this is liquid and the formation is really exothermic which causes the phosphorus to ignite in the first try. So we probably formed a lot of Oxides as well in this process.
If PBr3 is the desired product an excess of Phosphorus is required to make sure it wont be further brominated. PBr3 can then react with an additional Br2 to form PBr5 which is a solid compound and probably the yellow stuff you can see at the end in the pipette. PBr5 has a quite interesting structure as one would suspect a trigonal bipyramid with a serious Berry-Pseudo Rotation it actually forms [PBr4][Br] structures which can be formulated as Bond-No-Bond-structures much like Polyiodides have them.
Upon further reaction compound like PBr7 might form as well. Those will have Polybromides to avoid a too high coordination on the Phosphorus.
What you can see is first the formation of Bromine vapors, then the reaction and ignition of Phosphorus with Bromine and later some red Phosphorus in an Bromine atmosphere which will upon reaction slowly discolor the gas phase as the Bromine is consumed by the reaction. Phosphorus Chemistry: PBr5 formation](https://i.ytimg.com/vi/J6Xj_lEbj9M/mqdefault.jpg)
 complex. As Ag(I) prefers linear coordinations and we know Ag-N bonds from the soluble Diammine complex for example or Ag-NO3 as soluble compound the Ag-NO2 complex seems plausible. SIlver Chemistry: Silver Nitrite and Dinitroargentate(I)](https://i.ytimg.com/vi/JFjYBJkZSZc/mqdefault.jpg)
. As with almost all Pd(II) compounds the Iodopalladate(II) is a square-plane again.
At the end I place my hand behind the glass so you can see that it actually turned transparent as the cam doesnt pick it up that well. Palladium Chemistry: Tetraiodopalladate(II)](https://i.ytimg.com/vi/JGVemyRbRJw/mqdefault.jpg)



