Uploaded September 2016 | Updated November 2026, 18 hours ago
In this video we will try to make Phosphorus Bromides. As we don't want to isolate elemental Bromine for this reaction we thought of making a tiny amount in a test tube and use the vapors in the upper half of the tube as our source of pure bromine. Therefore we added some red Phosphorus to the tip of a glass pipette and hung it in the vapors.
Part one of the video is the synthesis of Bromine. Potassium Bromide is placed in a test tube and 3% Hydrogen Peroxide is added. To this conc. Sulfuric Acid is dropped. Now many say the Acid will displace HBr which is oxidized by Peroxide but I try to stay closer to the actual redox reaction.
H2O2 + 2 H3O(+) + 2 e(-) to 4 H2O
As you can see H3O(+) or H(+) if you shorten the equation is required to compensate the extra Oxides. These redox reactions, much like the Chromate and Permanganate redox reactions depend on pH values. And a bit of acid is required to reach this high redox potential which allows Bromides to be oxidized to Bromine. Using conc. H2SO4 alone would work as well since it is quite oxidizing and does a similar effect. Here I use the conc. acid since the heat of dilution with the 97% water of the peroxide will heat the mixture up and Bromine starts to boil off.
The second part of the reaction is the Bromination:
First 2 P + 3 Br2 form 2 PBr3 this is liquid and the formation is really exothermic which causes the phosphorus to ignite in the first try. So we probably formed a lot of Oxides as well in this process.
If PBr3 is the desired product an excess of Phosphorus is required to make sure it won't be further brominated. PBr3 can then react with an additional Br2 to form PBr5 which is a solid compound and probably the yellow stuff you can see at the end in the pipette. PBr5 has a quite interesting structure as one would suspect a trigonal bipyramid with a serious Berry-Pseudo Rotation it actually forms [PBr4][Br] structures which can be formulated as Bond-No-Bond-structures much like Polyiodides have them.
Upon further reaction compound like PBr7 might form as well. Those will have Polybromides to avoid a too high coordination on the Phosphorus.
What you can see is first the formation of Bromine vapors, then the reaction and ignition of Phosphorus with Bromine and later some red Phosphorus in an Bromine atmosphere which will upon reaction slowly discolor the gas phase as the Bromine is consumed by the reaction.
In this video we will try to make Phosphorus Bromides. As we don't want to isolate elemental Bromine for this reaction we thought of making a tiny amount in a test tube and use the vapors in the upper half of the tube as our source of pure bromine. Therefore we added some red Phosphorus to the tip of a glass pipette and hung it in the vapors.
Part one of the video is the synthesis of Bromine. Potassium Bromide is placed in a test tube and 3% Hydrogen Peroxide is added. To this conc. Sulfuric Acid is dropped. Now many say the Acid will displace HBr which is oxidized by Peroxide but I try to stay closer to the actual redox reaction.
H2O2 + 2 H3O(+) + 2 e(-) to 4 H2O
As you can see H3O(+) or H(+) if you shorten the equation is required to compensate the extra Oxides. These redox reactions, much like the Chromate and Permanganate redox reactions depend on pH values. And a bit of acid is required to reach this high redox potential which allows Bromides to be oxidized to Bromine. Using conc. H2SO4 alone would work as well since it is quite oxidizing and does a similar effect. Here I use the conc. acid since the heat of dilution with the 97% water of the peroxide will heat the mixture up and Bromine starts to boil off.
The second part of the reaction is the Bromination:
First 2 P + 3 Br2 form 2 PBr3 this is liquid and the formation is really exothermic which causes the phosphorus to ignite in the first try. So we probably formed a lot of Oxides as well in this process.
If PBr3 is the desired product an excess of Phosphorus is required to make sure it won't be further brominated. PBr3 can then react with an additional Br2 to form PBr5 which is a solid compound and probably the yellow stuff you can see at the end in the pipette. PBr5 has a quite interesting structure as one would suspect a trigonal bipyramid with a serious Berry-Pseudo Rotation it actually forms [PBr4][Br] structures which can be formulated as Bond-No-Bond-structures much like Polyiodides have them.
Upon further reaction compound like PBr7 might form as well. Those will have Polybromides to avoid a too high coordination on the Phosphorus.
What you can see is first the formation of Bromine vapors, then the reaction and ignition of Phosphorus with Bromine and later some red Phosphorus in an Bromine atmosphere which will upon reaction slowly discolor the gas phase as the Bromine is consumed by the reaction.
 complex. As Ag(I) prefers linear coordinations and we know Ag-N bonds from the soluble Diammine complex for example or Ag-NO3 as soluble compound the Ag-NO2 complex seems plausible. SIlver Chemistry: Silver Nitrite and Dinitroargentate(I)](https://i.ytimg.com/vi/JFjYBJkZSZc/mqdefault.jpg)
. As with almost all Pd(II) compounds the Iodopalladate(II) is a square-plane again.
At the end I place my hand behind the glass so you can see that it actually turned transparent as the cam doesnt pick it up that well. Palladium Chemistry: Tetraiodopalladate(II)](https://i.ytimg.com/vi/JGVemyRbRJw/mqdefault.jpg)




 and [Cu(H2O)5](2+) once more water is present the color changes to blue which is why the solution becomes colorless. If we had reduced it at that time we might have been able to form Cassius gold which is purple.
The last question is why the yellow-green color is so intense while the water one is colorless. This has to do with two things. First the conc. becomes smaller as more water is added diluting the intensity and on the other hand if we assume [CuCl4](2-) forms this is a tetrahedral complex while [Cu(H2O)5](2+) is octahedral, with some Jahn-Teller distortion of course. Often tetrahedral complexes tend to be much more intense in color as they do not possess an inverse symmetry. The lack of inverse symmetry influences the parity of the t2 and e, the split orbital sets used for coordination chemistry.
Absorption of light on the matter goes with the change of the dipole moment which is an odd function. And by absorbing photons you excite electrons which then jump between two energy levels (t2 and e). Those can be odd or even in parity. The overall process is the product of all three meaning it is either odd or even while according to quantum mechanics the probability of something is the square of the integral of the total space. Integrating an odd function like x³ will always lead to zero making it impossible. Problem is that complexes with inverse symmetry like the octahedral ones have a t2g and eg so both lower and higher energy level have the same parity.
The reason why we usually still see some color is because the ligands that form the octahedron have some movement as well and they do not move all synched. So the perfect symmetry is destroyed making it colored again.
And the last reason why the yellow-green is just more intense might be because some of the NO-gases formed also dissolve in water and color it brown-orange. Adding more water dissolves it to Nitrous acid. Gold Chemistry: Gold in Aqua Regia](https://i.ytimg.com/vi/KyhEi8vIn8Y/mqdefault.jpg)
![Manganese Chemistry: Cyanomanganate(II/III) and K[Mn(CN)3]
1) Mn(II) added to conc. KCN solution, then air bubbled through
2) Mn(II) added to low concentration of KCN then air bubbled through.
Explanation will come soon ! Manganese Chemistry: Cyanomanganate(II/III) and K[Mn(CN)3]](https://i.ytimg.com/vi/L5HdES4gB1g/mqdefault.jpg)
, so the analogue to the yellow Ferrocyanide. We tried it with a huge excess of Cyanide and it would only turn green. So we had the idea to also add a bit of acid. The reason to why we did this is further explained in our RuCl3-solution video. As the acid was added it turned blue then colourless.
Literature says that a Cyanoruthenate(III) exists as well as slightly yellow compound. So we left a part of the solution open for two weeks and it turned slightly yellow in that time (end of the video). Strong acids are said to precipitate Ru(CN)3 from this.
About the blue compound that formed in between:
When we did this experiment the first time we used a solution of RuCl3 in a bit of HCl we had already prepared a few weeks earlier. The reason to this was that we expected it to become more reactive as in that time the tightly bound Chloride ligands might eventually exchange for more reactive aqua ligands. As it turns out whatever species may form in this time (this depends on the actual composition of the “RuCl3”) reacts completely different from a freshly prepared solution. When we did this experiment and heated it it turned blue. We might upload the video once we find out what actually happened. So we looked it up and found only one possible idea, mentioned in the literature a long time ago and never really tested again, a Ru2(CN)5H2O. This blue compound is said to form in hydrochloric acid and it seems to be blue. So we used some of the colourless solution and added it to a bit of acidified RuCl3 and after a day it was blue as well.
What we think happens is the following: Hexacyanoruthenate(II) and (III) undergo a quick ligand exchange which is accelerated by a reduced pH value to yield [Ru(CN)5(H2O)](3-). This might react with unreduced Ru(III) in solution (if the conc of Cyanide is too low or the RuCl3 is added later when the mixture is cold) and it could be analogous to Prussian Blue.
What we think happens in the reaction is the following. We also tried to add the acid first and then the Cyanide and it produced a lot of HCN before the Cyanide could even reach the bottom of the tube while the other way around didn’t produce much gases. So we believe that the Cyanide and RuCl3 in fact reacted at elevated temperatures but some Ru(IV)-species (for example) which is present in commercial RuCl3, or better just call it insoluble rests either wasn’t fully dissolved yet or not reactive enough. When the acid was added this unit broke apart the colourless Cyano complex formed. But this also induced the other reaction which forms the blue compound. This seems to build up as intermediate and is then reduced as the rest of Ru(III) in the complex is reduced to colourless Ru(II).
If you have any suggestion to what it is we would be happy for any answers. As mentioned before it’s hard to find anything on this topic. Many compounds have been postulated but never tested afterwards. Ruthenium Chemistry: Cyano-Ruthenate (II/III)](https://i.ytimg.com/vi/L7RRZ6esZlY/mqdefault.jpg)

If Silver meets Chloride insolbule Silver Chloride is formed. This can be dissolved again using Ammonia solution which formed the transparent [Ag(NH3)2](-) complex. Silver Chemistry: AgCl2 and [Ag(NH3)2](-)](https://i.ytimg.com/vi/LM6y9maUL68/mqdefault.jpg)
